Data Sheet
January 19, 2012
12A Analog Pico DLynx
TM
: Non-Isolated DC-DC Power Modules
3Vdc –14.4Vdc input; 0.6Vdc to 5.5Vdc output; 12A Output Current
Features
Compliant to RoHS EU Directive 2002/95/EC (Z
versions)
Compatible in a Pb-free or SnPb reflow
environment (Z versions)
Compliant to IPC-9592 (September 2008),
Category 2, Class II
DOSA based
Wide Input voltage range (3Vdc-14.4Vdc)
Output voltage programmable from 0.6Vdc to
5.5Vdc via external resistor
Tunable Loop
response
TM
to optimize dynamic output voltage
RoHS Compliant
Power Good signal
Fixed switching frequency
Output overcurrent protection (non-latching)
Overtemperature protection
Remote On/Off
Ability to sink and source current
Cost efficient open frame design
Small size: 12.2 mm x 12.2 mm x 8.5 mm
(0.48 in x 0.48 in x 0.335 in)
Wide operating temperature range [-40°C to 85°C]
UL*
60950-1Recognized,
CSA
†
C22.2 No.
60950-1-03 Certified, and
VDE
‡
0805:2001-12
(EN60950-1) Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Industrial equipment
VIN
PGOOD
VOUT
SENSE
RTUNE
Vout+
Vin+
Co
MODULE
Cin
CTUNE
ON/OFF
GND
TRIM
RTrim
Description
The 12A Analog Pico DLynx
power modules are non-isolated dc-dc converters that can deliver up to 12A of
output current. These modules operate over a wide range of input voltage (V
IN
= 3Vdc-14.4Vdc) and provide a
precisely regulated output voltage from 0.6Vdc to 5.5Vdc, programmable via an external resistor. Features include
remote On/Off, adjustable output voltage, over current and over temperature protection. The Tunable Loop
TM
feature allows the user to optimize the dynamic response of the converter to match the load with reduced amount of
output capacitance leading to savings on cost and PWB area.
*
UL
is a registered trademark of Underwriters Laboratories, Inc.
†
‡
TM
CSA
is a registered trademark of Canadian Standards Association.
VDE
is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS10-008 ver. 1.14
PDF name: PVX012A0X.pdf