Advanced Data Sheet
February 10, 2011
QBDW033A0B Series Power Modules; DC-DC Converters
36-75V
dc
Input; 9.6-12V
dc
Output; 33A Output Current
BARRACUDA™ SERIES
Features
Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
High and flat efficiency profile >95.0% at 12V
dc
, 30%
to 100% rated output
Wide input voltage range: 36-75V
dc
Delivers up to 33A
dc
output current
Remote sense and output voltage trim
Fully regulated output voltage
Output voltage adjust: 8.1V
dc
to 13.2V
dc
Low output ripple and noise
Industry standard, DOSA compliant, Quarter brick:
57.9 mm x 36.8 mm x 10.6 mm
(2.28 in x 1.45 in x 0.42 in)
Constant switching frequency
Positive remote On/Off logic
Output over current/voltage protection
Digital interface with PMBus™ Rev.1.1 compliance
Over temperature protection
Wide operating temperature range (-40°C to 85°C)
UL* 60950-1 Recognized,
CSA
†
C22.2 No. 60950-1-
03 Certified, and
VDE
‡
0805:2001-12 (EN60950-1)
Licensed
§
CE mark 73/23/EEC and 96/68/EEC directives
Meets the voltage and current requirements for ETSI
300-132-2 and complies with and licensed for Basic
insulation rating per EN60950-1
2250 Vdc Isolation tested in compliance with IEEE
¤
802.3 PoE standards
ISO** 9001 and ISO14001 certified manufacturing
facilities
RoHS Compliant
Applications
Distributed power architectures
Intermediate bus voltage applications
Servers and storage applications
Networking equipment including Power over
Ethernet (PoE)
Fan assemblies other systems requiring a tightly
regulated output voltage
Options
Negative Remote On/Off logic
Active load sharing (Parallel Operation)
Baseplate option (-H)
Auto restart after fault shutdown
Description
The QBDW033A0B series of dc-dc converters are a new generation of DC/DC power modules designed to support
9.6 -12Vdc intermediate bus applications where multiple low voltages are subsequently generated using point of load
(POL) converters, as well as other application requiring a tightly regulated output voltage. The QBDW033A0B series
operate from an input voltage range of 36 to 75Vdc and provide up to 33A output current at output voltages from
8.1V
dc
to 12V
dc
in a DOSA standard quarter brick. The converter incorporates digital control, synchronous rectification
technology, a fully regulated control topology, and innovative packaging techniques to achieve efficiency approaching
97% peak at 12V
dc
output. This leads to lower power dissipations such that for many applications a heat sink is not
required. Standard features include output voltage trim, remote sense, on/off control, output overcurrent and over
voltage protection, over temperature protection, input under and over voltage lockout, power good signal and PMBus
interface.
The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. Built-
in filtering for both input and output minimizes the need for external filtering.
*
UL
is a registered trademark of Underwriters Laboratories, Inc.
†
‡
§
CSA
is a registered trademark of Canadian Standards Association.
VDE
is a trademark of Verband Deutscher Elektrotechniker e.V.
This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.
Document No: ADS10-006 ver 0.3
PDF Name: QBDW033A0B_ADS.pdf
LINEAGEPOWER [ LINEAGE POWER CORPORATION ]
