UL
®
LSI/CSI
LS7082N1
(631) 271-0400 FAX (631) 271-0405
April 2009
PIN ASSIGNMENT - TOP VIEW
V
DD
(+V )
INDX
RBIAS
V
SS
(-V )
A
NC
NC
14
13
12
A3800
LSI Computer Systems, Inc. 1235 Walt Whitman Road, Melville, NY 11747
FEATURES:
• x1, x2 and x4 mode selection
• Up to 16MHz output clock frequency
• INDEX input and output
• UP/DOWN indicator output
• Programmable output clock pulse width
• On-chip filtering of inputs for optical or
magnetic encoder applications.
• TTL and CMOS compatible I/Os
• +3V to +12V operation (V
DD
- V
SS
)
•
LS7082N1
(DIP);
LS7082N1-S
(SOIC ) -
See Figure 1
QUADRATURE CLOCK CONVERTER
1
2
3
LSI
INDX
UPCK
DNCK
UP/DN
x4/x1
B
x2
LS7082N1
4
5
6
7
11
10
9
8
DESCRIPTION:
The
LS7082N1
is a CMOS quadrature clock converter. Quad-
rature clocks derived from optical or magnetic encoders, when
applied to the A and B Inputs of the
LS7082N1,
are converted
to strings of Up Clocks and Down Clocks. Pulses derived from
the Index Track of an encoder, when applied to the INDX input,
produce absolute position reference pulses which are syn-
chronized to the Up Clocks and Down Clocks. These outputs
can be interfaced directly with standard Up/Down counters for
direction and position sensing of the encoder.
INPUT/OUTPUT DESCRIPTION:
V
DD
(Pin 1)
Supply Voltage positive terminal.
INDX
(Pin 2)
Encoder Index pulses are applied to this input.
RBIAS
(Pin 3)
Input for external component connection. A resistor con-
nected between this input and V
SS
adjusts the output clock
pulse width (Tow). For proper operation, the output clock
pulse width must be less than or equal to the A, B pulse
separation (T
OW
≤
T
PS)
.
V
SS
(Pin 4
)
Supply Voltage negative terminal.
A
(Pin 5)
Quadrature Clock Input A. This input has a filter circuit to
validate input logic level and eliminate encoder dither.
x2
(Pin 8)
A low level applied to this input selects x2 mode of opera-
tion. See Table 1 for Mode Selection Truth Table and
Figure 2 for Input/Output timing relationship.
B
(Pin 9)
Quadrature Clock Input B. This input has a filter circuit
identical to input A.
7082N1-043009-1
FIGURE 1
TABLE 1. MODE SELECTION TRUTH TABLE
x2 Input
0
1
1
x4/x1 Input
0 or 1
0
1
MODE
x2
x1
x4
x4/x1
(Pin 10)
This input selects between x1 and x4 modes of operation.
See Table 1 for Mode Selection Truth Table and Figure 2 for
Input/Output timing relationship.
UP/DN
(Pin 11)
The count direction at any instant is indicated at this output.
An UP count direction is indicated by a high, and a DOWN
count direction is indicated by a low (See Figure 2).
DNCK
(Pin 12)
This DOWN Clock output consists of low-going pulses gen-
erated when A input lags the B input (See Figure 2).
UPCK
(Pin 13)
This UP Clock output consists of low-going pulses gener-
ated when A input leads the B input (See Figure 2).
INDX
(Pin 14)
This output consists of low-going pulses generated by a
positive clock transition at the A input when INDX input
is high and B input is low and a negative clock transition
at the B input when INDX input is high and A input is high.
(See Figure 2).
NOTE:
All unused input pins must be tied to V
DD
or V
SS
.
LSI [ LSI COMPUTER SYSTEMS ]
