Mechanical Dimensions
Lambertian
Notes:
1.
The anode side of the device is
denoted by a hole in the lead frame.
Electrical insulation between the case
and the board is required – slug of
device is not electrically neutral. Do
not electrically connect either the
anode or cathode to the slug.
Drawings not to scale.
All dimensions are in millimeters.
All dimensions without tolerances are
for reference only.
2.
3.
4.
Side Emitting
Notes:
1.
The anode side of the device is
denoted by a hole in the lead frame.
Electrical insulation between the case
and the board is required – slug of
device is not electrically neutral. Do
not electrically connect either the
anode or cathode to the slug.
Caution must be used in handling this
device to avoid damage to the lens
surfaces that will reduce optical
efficiency.
Drawings not to scale.
All dimensions are in millimeters.
All dimensions without tolerances are
for reference only.
2.
3.
4.
5.
Luxeon V Emitter
2
Document #: DS34 (09/19/04)
LUMILEDS [ LUMILEDS LIGHTING COMPANY ]
