A3010
Cascadable Amplifier
10 kHz to 2500 MHz
Features
•
•
•
•
•
GAIN: 9.5 dB (TYP.)
DC COUPLING REQUIRED*
+/- 1 dB GAIN FLATNESS
HIGH DRIVER OUTPUT LEVEL: +18 dBm
INPUT/OUTPUT MATCH: < 2.0:1 (TYP.)
Rev. V4
Product Image
Description
The A3010 RF amplifier is a discrete hybrid design, which uses thin
film manufacturing processes for accurate performance and high reliability.
This single stage GaAs FET feedback amplifier design displays
impressive performance characteristics over a broadband frequency range.
An RF choke is used for DC power supply decoupling.
A voltage sequencing circuit can be used to ensure the
negative voltage (-5.2 Vdc) is turned on first and turned off last during
normal operation. Reference the application circuit on page 2.
The TO-8 package is hermetically sealed, and MIL-STD-883
environmental screening is available
.
Ordering Information
Part Number
A3010
CA3010 **
Package
TO-8
SMA Connectorized
** The connectorized version is not RoHs compliant.
Electrical Specifications: Z
0
= 50Ω, V
CC
= +12 / -5.2 V
DC
Typical
Parameter
Frequency
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Noise Figure (max)
Power Output
@ 1 dB comp. (min)
IP3
VSWR Input / Output (max)
DC Voltage - Positive
DC Current - Positive (max)
DC Voltage - Negative
DC Current - Negative (max)
Volts
mA
Volts
mA
Absolute Maximum Ratings
Parameter
Storage Temperature
Case Temperature
DC Voltage
Continuous Input Power
Short Term Input power
(1 minute max.)
Peak Power (3 µsec max.)
“S” Series Burn-In
Temperature (case)
Guaranteed
0º to 50ºC -54º to +85ºC**
0.010-2500
8.5
±1.0
0.010-2500
8.0
±1.2
Units
MHz
dB
dB
dB
dB
dBm
dBm
Absolute
Maximum
-62ºC to +125ºC
125ºC
+18 V
+17 dBm
100 mW
0.5 W
125ºC
25ºC
0.010-2500
9.5
±0.9
16
4.5
19.0
+35
5.5
17.0
6.0
16.5
2.0:1 / 2.0:1 2.2:1 / 2.2:1
+12
155
-5.2
15
+12
160
-5.2
20
2.3:1 / 2.3:1
+12
165
-5.2
25
Thermal Data:
V
CC
= +12/-5.2 V
DC
Parameter
Thermal Resistance
θ
jc
Transistor Power Dissipation P
d
Junction Temperature Rise
Above Case T
jc
Rating
105.6ºC/W
0.55 W
58.1ºC
*
Model A3010 requires external Input and output DC blocking capacitors (0.36 µF nominal) on the circuit board transmission lines for operation.
Model CA3010 has internal DC blocking capacitors integrated in the design, so external blocking capacitors are not required.
**
Over temperature performance limits for part number CA3010, guaranteed from 0
o
C to +50
o
C only.
1
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 •
Europe
Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
•
India
Tel: +91.80.4155721
•
China
Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA-COM [ M/A-COM TECHNOLOGY SOLUTIONS, INC. ]
