MAAMSS0014
Broadband Driver Amplifier
500 - 2400 MHz
Features
•
•
•
•
Low Cost Plastic SOT-89 Package
Broadband Operation
18 dBm P
OUT
at –50 dBc ACPR
24 dBm P1dB
Rev. V4
Functional Schematic
Description
M/A-COM’s MAAMSS0014 RF driver amplifier is a
GaAs MMIC which exhibits excellent ACPR
performance as well as high gain and low power
consumption in a low-cost SOT-89 surface mount
plastic package.
The MAAMSS0014 employs a monolithic single
stage design featuring a convenient 50-ohm input/
output impedance. This device runs off a single +5
volt supply and draws 110 mA typically. The design
provides excellent performance from 500 to 2400
MHz.
The MAAMSS0014 is fabricated using M/A-COM’s
iHBT process to realize low current and high power
functionality. The process features full passivation
for increased performance and reliability.
Pin 1
RF In
RF Out
Pin Configuration
Pin No.
1
2
Function
RF In
GND
Pin No.
3
Function
RF Out/Bias
Absolute Maximum Ratings
3,4
Ordering Information
1,2
Part Number
MAAMSS00014SMB-01
MAAMSS00014SMB-02
MAAMSS0014TR
MAAMSS0014TR-3000
Package
Sample Test Board
900 MHz
Sample Test Board
1900 MHz
1000 Piece Tape and Reel
3000 Piece Tape and Reel
Parameter
RF Input Power
500 MHz
900 MHz
1900 MHz
Voltage
Operating Temperature
Storage Temperature
3
Absolute Maximum
0 dBm
2 dBm
4 dBm
6.0 volts
-40 °C to +85 °C
-65 °C to +150 °C
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. The MAAMSS0014 is designed to operate optimally at 10 dB
backed off from its output P1dB of 24 dBm. Driving the device
at higher power levels could degrade performance.
1
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.