MAAMSS0031
Broadband CATV Amplifier
50 - 1000 MHz
Features
•
•
•
•
•
Low Cost Plastic SOT-89 Package
75 Ohm Input / Output Match
-80 dBc CTB
2.7 dB Noise Figure
14.8 dB Gain
Rev. V4
Functional Schematic
Description
M/A-COM’s MAAMSS0031 CATV amplifier is a
GaAs MMIC which exhibits low distortion in a
low-cost miniature surface mount plastic package.
The MAAMSS0031 employs a monolithic single
stage design featuring a convenient 75
Ω
input/
output impedance that minimizes the number of
external components required.
The MAAMSS0031 provides low noise and high
linearity. It is ideally suited for set top boxes, home
gateways, and other broadband internet based
appliances.
The MAAMSS0031 is fabricated using M/A-COM’s
PHEMT process to realize low noise and low
distortion. The process features full passivation for
robust performance and reliability.
Pin 1
Pin Configuration
Pin No.
1
2
3
Pin Name
RF
IN
GND
RF
OUT
Description
RF Input
Ground
RF Output / Drain Supply
Ordering Information
1,2
Part Number
MAAMSS0031
MAAMSS0031TR
MAAMSS0031TR-3000
MAAMSS0031SMB
Package
SOT-89 Plastic Package
1000 Piece Tape and Reel
3000 Piece Tape and Reel
Sample Test Board
Absolute Maximum Ratings
3,4,5
Parameter
RF Input Power
Voltage
Operating Temperature
Junction Temperature
6
Storage Temperature
Absolute Maximum
15 dBm
10.0 volts
-40°C to +85°C
+150°C
-65°C to +150°C
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM does not recommend sustained operation near these
survivability limits.
5. These operating conditions will ensure MTTF > 1 x 10
6
hours.
6. Junction Temperature (T
J
) = T
C
+
Өjc
* (V * I)
Typical thermal resistance (Өjc) = 75° C/W.
a) For T
C
= 25°C,
T
J
= 85°C @ 8 V, 100 mA
b) For T
C
= 85°C,
T
J
= 139 °C @ 8 V, 90 mA
1
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.