MRF150
RF Power FET
150W, to 150MHz, 50V
Designed primarily for linear large-signal output stages up
to 150 MHz
•
Superior high order IMD
IMD(d3) (150W PEP): –32dB (Typ.)
IMD(d11) (150W PEP): –60dB (Typ.)
•
Specified 50V, 30MHz characteristics
Output power = 150 Watts
Power gain = 17 dB (Typ.)
Efficiency = 45% (Typ.)
•
100% tested for load mismatch at all phase angles
M/A-COM Products
Released - Rev. 9
Product Image
1
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
•
Europe
Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
•
Asia/Pacific
Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MA-COM [ M/A-COM TECHNOLOGY SOLUTIONS, INC. ]
