Catalog 82042
Standard Terminals and Splices
Revised 8-00
TERMINYL
Product Facts
s
Basic Terminal Material.
The
basic terminal is constructed of
fine grade high conductivity copper
per ASTM B-152 and tin-plated per
ASTM B-545.
AMP’s special plating process cre-
ates durable corrosion resistance
to salt spray and most chemical
fumes.
s
s
s
s
s
s
Designed to provide insu-
lated terminals and splices
for large wire sizes, many
of which are used in air-
borne and ground support
applications
Tested under the proce-
dures stipulated by MIL
Spec. MIL-T-7928, they
meet and exceed require-
ments
Designed and engineered
to withstand extreme vibra-
tion, shock and structural
stresses, elevated temper-
atures and other conditions
which could adversely
affect the circuit require-
ments in complex air and
space flight equipment
The use of matching AMP
tooling provides for preci-
sion crimping which makes
all terminations identical
This uniformity promotes
maximum reliability and,
coupled with tool die marks
on the barrel indicating the
wire size and color coding
of the insulation sleeve,
also serves as a built-in
quality control factor
Pre-insulated with color
coded nylon which also acts
as insulation support
Wire size range of ter-
minals is 8 AWG through
4/0 AWG
Funnel Entry.
Molded insulation
for ease of wire insertion and
snug fit over MIL-standard wire
diameters.
Insulation.
Nylon insulation for
dielectric strength, color coded to
wire size.
Dimples.
Dimples afford maximum
contact of barrel and wire and
maximum tensile strength.
Temperature Rating: 105°C Max.
Table of Contents
Terminals
Ring Tongue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60, 61
Splices
Butt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
TERMINYL Terminals meet or exceed the requirements of MIL-T-7928, Type II,Class 2.
Refer to AMP Qualified Products for Military Application,
Catalog 73-159 for Military Specification Number to
AMP Part Number cross reference.
59
Dimensions are shown for reference
purposes only.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets are
metric equivalents.
Specifications subject to change.
Technical Support Center
1-800-522-6752
www.amp.com
MACOM [ Tyco Electronics ]
