Solitel
®
Vibrating Rod
Level Switch
D E S C R I P T I O N
Solitel
®
Vibrating Rod Level Switches provide reliable
level detection of powders and bulk solids. This com-
pact, integral switch is suitable for high or low level
detection in hoppers or silos. It may also be used for
plugged chute detection.
The single-piece probe and the unique self-clean cycle
avoid problems of buildup. Sensitivity of the instrument
can be adjusted to detect a variety of solid materials
ranging from heavy granular materials to light powders
with bulk densities less than one pound per cubic foot.
T E C H N O L O G Y
The Solitel rod vibrates at a frequency of 350 Hz. When
in contact with the media, the vibration is dampened.
The attenuation of the vibration is detected by the inte-
gral mount electronics which change the state of the
relay. The unique self-clean feature is activated when
the vibration is dampened. The self-clean circuitry
increases the amplitude of the vibration to dislodge any
buildup which may have occurred.
F E A T U R E S
•
Single rod design eliminates clogging
•
High temperature version up to +320° F (+160° C)
•
Self-clean cycle and polished probe minimize
solids buildup
•
Class I, Div. 2 and Class II, Div. 1 approval
•
Adjustable sensitivity allows easy calibration for
various bulk densities
•
Extended rigid probes up to 100 inches (2540 mm)
•
Extended flexible lengths to 65 feet (20 meters)
A P P L I C A T I O N S
Powders and bulk solids with maximum particle size
of
1
⁄
2
inch (10 mm) including:
•
Plastic powders and pellets
•
Wood chips and sawdust
•
Pulverized coal
•
Fly ash
•
Cement, lime
•
Perlite
•
Aerosil
®
(fume silica)