www.make-ps.com
E-mail:info@make-ps.com
Standard Application Circuit
Vin
1
C1
10µF
MS - 78XX- NZ
3
C2
100µF
Vout
2
GND
GND
C1:
A low ESR capacitor is required to keep the noise of the converter to a minimum.
Ceramic capacitors are recommended, but tantalum or electrolytic may be used. Typical value is 10µF / 50V.
C2:
Installation of C2 is recommended but optional. Typical recommended value is 100µF / 25V electrolytic.
NOTE: This part is not designed for parallel operation
3 of 3