TB62718AFG
•
•
•
•
•
•
•
For anode-common LEDs
Input signal voltage level: CMOS level (Schmitt trigger input)
Power supply voltage range V
DD
= 4.5 V~5.5 V
Maximum output pin voltage: 26 V
Serial and parallel data transfer rate: 20 MHz (max, cascade connection)
Operating temperature range T
opr
=
−40°C~85°C
Package: HQFP64-P-1010-0.50. A Heat sink can be fitted.
Warnings
Short-circuiting an output pin to GND or to the power supply pin may destroy the device.
Take care when wiring the output pins, the power supply pin and the GND pins (V
SS
, V
SS2
).
Do not apply either positive or negative voltages to the heat sink on the surface of the IC.
In addition, do not solder anything to the heat sink.
2
2005-04-20