19-2637; Rev 1; 4/03
µP Supervisors with Separate V
CC
Reset and
Manual Reset Outputs
General Description
The MAX6453–MAX6456 are low-power, dual-voltage
µP supervisors featuring separate V
CC
reset and manu-
al reset outputs. The dual outputs support both soft-
system reset (interrupt) and hard-system reset (reboot)
functions. The reset output asserts when any of the
monitored voltages falls below its specified threshold
and remains asserted for the reset timeout (140ms min)
after all voltages exceed their respective reset thresh-
olds. All devices are offered with nine factory-fixed
reset thresholds for monitoring primary system voltages
(V
CC
) from 1.8V to 5V and an adjustable reset input for
monitoring a secondary system voltage down to 0.63V.
Each device has a manual reset input, a V
CC
reset out-
put, and a manual reset output. The MAX6453/
MAX6454 manual reset output asserts when the manual
reset input is low. It remains asserted for the manual
reset timeout period (140ms min) after the manual reset
input transitions high. The MAX6453/MAX6354 manual
reset input controls only the manual reset output and
does not affect the V
CC
reset output.
The manual reset input of the MAX6455/MAX6456 con-
trols both the manual reset and V
CC
reset outputs. When
the manual reset input is low for less than 3.3s (typ), only
the manual reset output asserts and remains asserted for
the manual reset timeout period (140ms min) after the
manual reset input transitions high. If the manual reset
input is low for at least 3.3s (typ), the reset output also
asserts and remains asserted for the reset timeout peri-
od (140ms min) after the manual reset input transitions
high. This enhanced feature allows the implementation of
a soft/hard-system reset combination.
The MAX6453/MAX6455 have active-low push-pull
reset and manual reset outputs, and the MAX6454/
MAX6456 have active-low open-drain reset and manual
reset outputs. All devices are available in small SOT23-
6 packages and are fully specified over the extended
temperature range (-40°C to +85°C).
Features
o
Precision Factory-Set Reset Thresholds From
1.6V to 4.6V
o
Adjustable Threshold to Monitor Voltages Down
to 0.63V
o
Manual Reset Input with Extended 3.36s Setup
Period
o
Immune to Short Voltage Transients
o
Low 6µA Supply Current
o
Guaranteed Valid Reset Down to V
CC
= 1.0V
o
Active-Low
RESET
(Push-Pull or Open-Drain)
Outputs
o
140ms (min) Reset Timeout Period
o
Small SOT Package
MAX6453–MAX6456
Ordering Information
PART
MAX6453UT_
_S-T
MAX6454UT_
_S-T
MAX6455UT_
_S-T
MAX6456UT_
_S-T
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
6 SOT23-6
6 SOT23-6
6 SOT23-6
6 SOT23-6
Note:
The “_” is a placeholder for the threshold voltage level of
the devices. A desired threshold level is set by the part num-
ber suffix found in Table 1. All devices are available in tape-
and-reel only. There is a 2500-piece minimum order increment
for standard versions (Table 2). Sample stock is typically held
on standard versions only. Nonstandard versions require a
minimum order increment of 10,000 pieces. Contact factory for
availability.
Selector Guide appears at end of data sheet.
Applications
Set-Top Boxes
Consumer Electronics
DVD Players
Modems
MP3 Players
Industrial Equipment
Automotive
Medical Devices
MROUT 3
4
GND 2
RESET 1
6
Pin Configurations
TOP VIEW
MR
RESET 1
6
MR
MAX6453
MAX6454
5
RSTIN
GND 2
MAX6455
MAX6456
5
RSTIN
V
CC
MROUT 3
4
V
CC
SOT23-6
SOT23-6
________________________________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
MAXIM [ MAXIM INTEGRATED PRODUCTS ]
