欢迎访问ic37.com |
会员登录 免费注册
发布采购

MAX6469UT285BD3-T 参数 Datasheet PDF下载

MAX6469UT285BD3-T图片预览
型号: MAX6469UT285BD3-T
PDF下载: 下载PDF文件 查看货源
内容描述: 300毫安LDO线性稳压器,内置微处理器复位电路\n [300mA LDO Linear Regulators with Internal Microprocessor Reset Circuit ]
分类和应用: 线性稳压器IC调节器电源电路微处理器复位电路光电二极管输出元件信息通信管理
文件页数/大小: 20 页 / 563 K
品牌: MAXIM [ MAXIM INTEGRATED PRODUCTS ]
 浏览型号MAX6469UT285BD3-T的Datasheet PDF文件第2页浏览型号MAX6469UT285BD3-T的Datasheet PDF文件第3页浏览型号MAX6469UT285BD3-T的Datasheet PDF文件第4页浏览型号MAX6469UT285BD3-T的Datasheet PDF文件第5页浏览型号MAX6469UT285BD3-T的Datasheet PDF文件第6页浏览型号MAX6469UT285BD3-T的Datasheet PDF文件第7页浏览型号MAX6469UT285BD3-T的Datasheet PDF文件第8页浏览型号MAX6469UT285BD3-T的Datasheet PDF文件第9页  
19-2532; Rev 1; 10/02
KIT
ATION
EVALU
BLE
AVAILA
300mA LDO Linear Regulators with
Internal Microprocessor Reset Circuit
General Description
Features
o
3
3 UCSP, 6-Pin SOT23, and 8-Pin QFN Packages
o
Preset +1.5V to +3.3V Output (100mV Increments)
o
SET Pin for Adjustable Output Voltage
o
75µV
RMS
LDO Output Voltage Noise
(MAX6477–MAX6484)
o
±2.0% Accuracy Over Temperature
o
Guaranteed 300mA Output Current
o
Low Dropout Voltage
55mV at 150mA
114mV at 300mA
o
82µA Supply Current, 0.1µA Shutdown Current
o
Input Reverse Current, Thermal and Short-Circuit
Protection
o
Microprocessor Reset with Four Timeout Options
o
Push-Pull or Open-Drain
RESET
o
Manual Reset Input
o
Remote Feedback Sense
MAX6469–MAX6484
The MAX6469–MAX6484 are low-dropout linear regula-
tors with a fully integrated microprocessor reset circuit.
Each is available with preset output voltages from +1.5V
to +3.3V in 100mV increments and delivers up to 300mA
of load current. These devices consume only 82µA of
supply current. The low supply current, low dropout volt-
age, and integrated reset functionality make these
devices ideal for battery-powered portable equipment.
The MAX6469–MAX6484 include a reset output that indi-
cates when the regulator output drops below standard
microprocessor supply tolerances (-7.5% or -12.5% of
nominal output voltage). This eliminates the need for an
external microprocessor supervisor, while ensuring that
supply voltages and clock oscillators have stabilized
before processor activity is enabled. Push-pull and open-
drain active-low reset outputs are available, with reset
timeout periods of 2.5ms, 20ms, 150ms, or 1200ms (min).
The MAX6469/MAX6470/MAX6473–MAX6478/MAX6481–
MAX6484 also have a shutdown feature that reduces the
supply current to 0.1µA (typ). The MAX6471–MAX6474/
MAX6479–MAX6482 offer a manual reset input to assert a
microprocessor reset while the regulator output is within
specification. The MAX6475/MAX6476/MAX6483/
MAX6484 feature a remote feedback sense pin for use
with an external NPN transistor for higher-current applica-
tions. The MAX6469–MAX6476 are available in 6-pin
SOT23 and 8-pin thin QFN packages. The MAX6477–
MAX6484 are available in a 3
×
3 chip-scale package
(UCSP™). All devices are specified for operation from
-40°C to +85°C.
Ordering Information
PART
MAX6469UT_
_ _D_-T
MAX6469TA_ _ _D_*
MAX6470UT_
_ _D_-T
MAX6470TA_ _ _D_*
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-
PACKAGE
6 SOT23-6
8 Thin QFN
6 SOT23-6
8 Thin QFN
Applications
Hand-Held Instruments (PDAs, Palmtops)
PCMCIA Cards/USB Devices
Cellular/Cordless Telephones
CD/DVD Drives
Notebook Computers
Digital Cameras
Bluetooth Modules/Wireless LAN
*Future
product—contact factory for availability.
Note:
The first “_ _”are placeholders for the output voltage levels
of the devices. Desired output voltages are set by the suffix found
in the Output Voltage Suffix Guide (Table 1). The third “_” is a
placeholder for the reset threshold accuracy. Desired reset
threshold accuracy is set by the suffix found in the Reset
Threshold Accuracy Guide (Table 2). The “_” following the D is a
placeholder for the reset timeout delay time. Desired reset timeout
delay time is set by the suffix found in the Reset Timeout Delay
Guide (Table 3). For example, the MAX6481BL30BD4-T has a
3.0V output voltage, 12.5% reset threshold tolerance, and a
1200ms (min) reset timeout delay. Sample stock is generally avail-
able on standard versions only (Table 4). Standard versions
require a minimum order increment of 2.5k units. Nonstandard
versions must be ordered in 10k-unit increments. Contact factory
for availability.
Ordering Information continued at end of data sheet.
UCSP is a trademark of Maxim Integrated Products, Inc.
Pin Configurations appear at end of data sheet.
Typical Operating Circuits appear at end of data sheet.
________________________________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.