MDT2020(DF)
1. General Description
This EPROM-Based 8-bit micro-controller
uses a fully static CMOS design technology
combines higher speed and smaller size with
the low power and high noise immunity of
CMOS.
On chip memory system includes 2.0 K bytes
of ROM, and 80 bytes of static RAM.
u
Addressing modes include direct,
indirect and relative addressing modes
u
Power-on Reset
u
Power Edge-detector Reset
u
Sleep mode for power saving
u
4 oscillator start-up time :
150
µs,
20 ms, 40 ms, 80 ms
u
8-bit real time clock/counter(RTCC) with
8-bit programmable prescaler
u
4 types of oscillator can be selected by
code options :
RC-Low cost RC oscillator
LFXT-Low frequency crystal oscillator
XTAL-Standard crystal oscillator
HFXT-High frequency crystal oscillator
u
On-chip RC oscillator based Watchdog
Timer(WDT) can be operated freely
u
20 I/O pins with their own independent
direction control
2. Features
The followings are some of the features on
the hardware and software :
u
Fully CMOS static design
u
8-bit data bus
u
On chip ROM size : 2 K words
u
Internal RAM size : 80 bytes
(72 general purpose, 8 special registers)
u
36 single word instructions
u
14-bit instructions
u
2-level stacks
u
Operating voltage : 2.3 V ~ 5.5 V
u
Operating frequency : 0 ~ 20 MHz
u
The most fast execution time is 200 ns
under 20 MHz in all single cycle
instructions
except
the
branch
instruction.
3. Applications
The application areas of this MDT2020
range from appliance motor control and high
speed automotive to low power remote
transmitters/receivers, pointing devices, and
telecommunications processors, such as
Remote controller, small instruments,
chargers, toy, automobile and PC
peripheral … etc.
This specification are subject to be changed without notice. Any latest information please preview
http;//www.mdtic.com.tw
P. 1
2005/6
VER 1.3