150W Single Output Switching Power Supply
Features :
CLG-150
series
Universal AC input / Full range (up to 280VAC)
Protections: Short circuit / Overload / Over voltage / Over temperature
Built-in active PFC function
Cooling by free air convection
OCP point adjustable through output cable or internal potential meter
Suitable for LED lighting and moving sign applications
IP65 design for indoor or outdoor installations
3 years warranty
F
110
SELV
EQUIVALENT
IP65
( for A,B type only )
CLG-150-12 A
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potential meter.
B : IP65 rated. Constant current level adjustable through output cable. (Optional)
C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal
potential meter. (Optional)
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
RATED POWER
CLG-150-12
12V
11A
132W
CONSTANT CURRENT REGION
Note.4
6 ~12V
CLG-150-15
15V
7.5 ~ 15V
9.5A
142.5W
150mVp-p
13 ~ 17V
4.75 ~ 9.5A
2.0%
0.5%
1.0%
CLG-150-20
20V
10 ~ 20V
7.5A
150W
150mVp-p
17 ~ 22V
3.75 ~ 7.5A
2.0%
0.5%
1.0%
230VAC /115VAC
CLG-150-24
24V
12 ~ 24V
6.3A
151.2W
150mVp-p
22 ~ 27V
3.15 ~ 6.3A
1.0%
0.5%
0.5%
CLG-150-30
30V
15 ~ 30V
5A
150W
150mVp-p
26 ~ 32V
2.5 ~ 5A
1.0%
0.5%
0.5%
CLG-150-36
36V
18 ~ 36V
4.2A
151.2W
150mVp-p
31 ~ 41V
2.1 ~ 4.2A
1.0%
0.5%
0.5%
CLG-150-48
48V
24 ~ 48V
3.2A
153.6W
200mVp-p
40 ~ 56V
1.6 ~ 3.2A
1.0%
0.5%
0.5%
RIPPLE & NOISE (max.)
Note.2
150mVp-p
VOLTAGE ADJ. RANGE
Note.6
9 ~ 13V
OUTPUT
CURRENT ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR
INPUT
EFFICIENCY (Typ.)
AC CURRENT
INRUSH CURRENT(max.)
LEAKAGE CURRENT
OVER CURRENT
SHORT CIRCUIT
PROTECTION
OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
Note.4
Can be adjusted by internal potential meter or through output cable
5.5 ~ 11A
2.0%
0.5%
1.0%
50ms / 230VAC
3000ms, 80ms at full load
Note.5
90 ~ 280VAC
16ms / 115VAC at full load
127 ~ 396VDC
PF 0.98/115VAC at full load and rated output voltage
88%
90%
90%
90%
89%
90%
47 ~ 63Hz
PF 0.95/230VAC
88%
2A / 115VAC
1A / 230VAC
COLD START 65A/230VAC
<2mA / 240VAC
LED-Load : CC-mode max. 105%
CV-mode max. 110%
Electronic-Load : CC-mode max. 110%
CV-mode max. 105%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Note.8
Hiccup mode, recovers automatically after fault condition is removed
13.5 ~ 16V
100
10
18 ~ 20V
(RTH2)
@ full load ; +70
, 10 ~ 95% RH
(0 ~ 50
)
23 ~ 27V
28 ~ 34V
33 ~ 36V
42 ~ 48V
57 ~ 65V
Protection type : Shut down and latch off o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover
Note.7
-30 ~ +55
@ 60% load
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
20 ~ 90% RH non-condensing
-40 ~ +80
0.03%/
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1, EN61347-1, EN61347-2-13 approved, IP65 approved (for A,B type only)
I/P-O/P:3.75KVAC
I/P-FG:1.88KVAC
O/P-FG:1.5KVAC
SAFETY & ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
EMC
EMI CONDUCTION & RADIATION
Compliance to EN55015, EN55022 (CISPR22) Class B
HARMONIC CURRENT
EMS IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
Compliance to EN61000-3-2 Class C (>50% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, light industry level (surge 4KV), criteria A
303.7Khrs min. MIL-HDBK-217F (25 )
222*68*39mm (L*W*H)
1.0Kg; 12pcs/13Kg/0.49CUFT(CLG-150-A/B)
1Kg; 12pcs/13Kg/0.96CUFT(CLG-150-C)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please
reconfirm special electrical requirements for some specific system design.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. Type A and type C only.
7. Please refer to derating curve.
8. Please refer to OLP characteristics.
File Name:CLG-150-SPEC 2008-12-23
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
