100W Single Output Industrial DIN Rail Power Supply
Features :
Universal AC input / Full range
DR-100
series
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
Isolation class
LED indicator for power on
No load power consumption<1W
100% full load burn-in test
3 years warranty
..
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
OTHERS
NOTE
Note.6
DR-100-12
12V
7.5A
0 ~ 7.5A
90W
12 ~ 15V
2.0%
1.0%
1.0%
2700ms, 80ms/230VAC
50ms/230VAC
88 ~ 264VAC
47 ~ 63Hz
87%
DR-100-15
15V
6.5A
0 ~ 6.5A
97.5W
120mVp-p
15 ~ 18V
1.0%
1.0%
1.0%
2700ms, 80ms/115VAC at full load
18ms/115VAC at full load
124 ~ 370VDC
87%
DR-100-24
24V
4.2A
0 ~ 4.2A
100.8W
150mVp-p
24 ~ 29V
1.0%
1.0%
1.0%
RIPPLE & NOISE (max.)
Note.2
120mVp-p
89%
3A/115VAC
1.6A/230VAC
COLD START 30A/115VAC
45A/230VAC
105 ~ 135% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
16 ~ 20V
19 ~ 23V
30 ~ 35V
Protection type : Shut down o/p voltage, re-power on to recover
90
15
(RTH2) detect on heatsink of power transistor
Protection type : Shut down o/p voltage, re-power on to recover
-20 ~ +60 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +85
, 10 ~ 95% RH
0.03%/ (0 ~ 50 )
Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
UL60950-1, TUV EN60950-1 approved, design refer to EN50178
I/P-O/P:3KVAC
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN61204-3, EN55022 Class B, EN61000-3-2,-3
Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
486K hrs min. MIL-HDBK-217F (25 )
100*93*56mm (W*H*D)
0.35Kg; 36pcs/13.6Kg/0.89CUFT
SAFETY &
EMC
(Note 4)
DIMENSION
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Harmonic current test @ 90% load.
6. Under short circuit or overload >150% conditions, output voltage may shut down for 5 sec. and then go into constant current protection mode.
File Name:DR-100-SPEC 2011-06-17
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
