45W Single Output Industrial DIN Rail Power Supply
Features :
Universal AC input/Full range
DR-45
series
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment)approved
LED indicator for power on
100% full load burn-in test
Fix switching frequency at 100KHz
3 years warranty
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
OTHERS
NOTE
DR-4505
5V
5A
0 ~ 5A
25W
4.75 ~ 5.5V
2.0%
1.0%
1.0%
DR-4512
12V
3.5A
0 ~3. 5A
42W
200mVp-p
10.8 ~ 13.2V
1.0%
1.0%
1.0%
DR-4515
15V
2.8A
0 ~ 2.8A
42W
240mVp-p
13.5 ~ 16.5V
1.0%
1.0%
1.0%
DR-4524
24V
2A
0 ~ 2A
48W
480mVp-p
21.6 ~ 26.4V
1.0%
1.0%
1.0%
RIPPLE & NOISE (max.)
Note.2
100mVp-p
800ms, 60ms/230VAC at full load
60ms/230VAC at full load
85 ~ 264VAC
47 ~ 63Hz
72%
77%
77%
80%
1.5A/115VAC
0.75A/230VAC
COLD START 28A/115VAC
56A/230VAC
<1mA / 240VAC
105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V
27.6 ~ 32.4V
Protection type : Shut off o/p voltage, clamping by zener diode
Tj 135
typically (U1) detect on heat sink of power transistor
Protection type : Shut down o/p voltage, re-power on to recover
-10 ~ +50 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-20 ~ +85
, 10 ~ 95% RH
0.03%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
UL508, TUV EN60950-1 approved
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55011,EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
364.6K hrs min. MIL-HDBK-217F (25
93*78*67mm (L*W*H)
0.31Kg; 48pcs/17.5Kg/1.3CUFT
)
120 ~ 370VDC
SAFETY &
EMC
(Note 4)
DIMENSION
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:DR-45-SPEC 2011-06-07
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
