120W Single Output Switching Power Supply
Features :
HLG-120H
series
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
High efficiency up to 93.5%
Protections: Short circuit / Over current / Over voltage / Over temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potentiometer
IP67 / IP65 design for indoor or outdoor installations
Three in one dimming function (1~10Vdc or PWM signal or resistance)
Suitable for LED lighting and street lighting applications
Compliance to worldwide safety regulations for lighting
Suitable for dry / damp / wet locations
5 years warranty (Note.9)
F
110
M
M
SELV
IP65 IP67
HLG-120H-12 A
Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance.
D
(option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
RATED POWER
HLG-120H-12
12V
10A
120W
HLG-120H-15
15V
8A
120W
150mVp-p
13.5 ~ 17V
4 ~ 8A
2.0%
0.5%
HLG-120H-20
20V
6A
120W
150mVp-p
17 ~ 22V
3 ~ 6A
1.0%
0.5%
0.5%
HLG-120H-24
24V
5A
120W
150mVp-p
22 ~ 27V
2.5 ~ 5A
1.0%
0.5%
0.5%
HLG-120H-30
30V
4A
120W
200mVp-p
27 ~ 33V
2 ~ 4A
1.0%
0.5%
0.5%
HLG-120H-36
36V
3.4A
122.4W
200mVp-p
33 ~ 40V
1.7 ~ 3.4A
1.0%
0.5%
0.5%
HLG-120H-42
42V
2.9A
121.8W
200mVp-p
38 ~ 46V
1.4 ~ 2.9A
1.0%
0.5%
0.5%
HLG-120H-48
48V
2.5A
120W
200mVp-p
43 ~ 53V
1.2 ~ 2.5A
1.0%
0.5%
0.5%
HLG-120H-54
54V
2.3A
124.2W
200mVp-p
49 ~ 58V
1.1 ~ 2.3A
1.0%
0.5%
0.5%
RIPPLE & NOISE (max.)
Note.2
150mVp-p
VOLTAGE ADJ. RANGE
Note.5
10.8 ~ 13.5V
OUTPUT
CURRENT ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR (Typ.)
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVER CURRENT
SHORT CIRCUIT
PROTECTION
OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
Can be adjusted by internal potentiometer or through output cable
5 ~ 10A
2.5%
0.5%
1.5%
2.0%
Note.7
2500ms, 50ms at full load
12ms at full load
Note.4
90 ~ 305VAC
230VAC / 115VAC ; B type 2500ms, 200ms at 95% load
230VAC / 115VAC
230VAC / 115VAC
127 ~ 431VDC
47 ~ 63Hz
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
92%
92%
93%
1.4A / 115VAC
0.6A / 230VAC
COLD START 75A/230VAC
<0.75mA / 277VAC
95 ~ 108%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
47 ~ 53V
34 ~ 38V
14 ~ 17V
18 ~ 21V
28 ~ 34V
41 ~ 46V
23 ~ 27V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
85
10 (RTH2)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-40 ~ +70
-40 ~ +80
0.03%/
(Refer to "Derating Curve")
, 10 ~ 95% RH
(0 ~ 50
)
20 ~ 95% RH non-condensing
93%
93%
0.55A / 277VAC
93%
93%
93.5%
93.5%
54 ~ 60V
59 ~ 65V
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
I/P-O/P:3.75KVAC
I/P-FG:1.88KVAC
O/P-FG:0.5KVAC
SAFETY STANDARDS
Note.6
UL8750,
EN61347-1, EN61347-2-13 independent
, J61347-1, J61347-2-13,
IP65 or IP67
approved ; Design refer to UL60950-1, TUV EN60950-1
SAFETY &
EMC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, heavy industry level (surge 4KV), criteria A
192.2Khrs min. MIL-HDBK-217F (25 )
220*68*38.8mm (L*W*H)
1.12Kg; 12pcs/14.4Kg/0.74CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the static characteristics for more details.
5. Type A only.
6. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18.
7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. Refer to warranty statement.
File Name:HLG-120H-SPEC 2011-07-28
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
