35W Single Output Switching Power Supply
Features :
LPC-35
series
Constant current design
Universal AC input / Full range
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Over voltage
Cooling by free air convection
Fully encapsulated with IP67 level (Note.8)
Fully isolated plastic case
Class
power unit, no FG
Class 2 power unit
Pass LPS
Suitable for LED lighting and moving sign applications (Note.7)
100% full load burn-in test
Low cost, high reliability
2 years warranty
SPECIFICATION
MODEL
RATED CURRENT
DC VOLTAGE RANGE
RATED POWER
VOLTAGE TOLERANCE
Note.3
CURRENT ACCURACY
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT(max.)
LEAKAGE CURRENT
PROTECTION OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY &
EMC
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
EMC IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
LPS
IP67
LPC-35-700
700mA
9 ~ 48V
33.6W
5.0%
5.0%
1.0%
2.0%
Note.6
500ms, 120ms / 230VAC
( for 700mA only)
( except for 700mA )
LPC-35-1050
1050mA
9 ~ 30V
31.5W
200mVp-p
LPC-35-1400
1400mA
9 ~ 24V
33.6W
200mVp-p
RIPPLE & NOISE (max.)
Note.2
200mVp-p
OUTPUT
500ms, 120ms / 115VAC at full load
50ms/230VAC
Note.4
90 ~ 264VAC
16ms/115VAC at full load
127 ~ 370VDC
47 ~ 63Hz
85%
1.1A/115VAC 0.7A/230VAC
COLD START 30A/115VAC
0.25mA / 240VAC
50.4 ~ 60V
-30 ~ +75
-40 ~ +80
(Refer to "Derating Curve")
, 10 ~ 95% RH
31.5 ~ 40.5V
27.6 ~ 32.4V
Protection type : Shut off o/p voltage, clamping by zener diode
20 ~ 90% RH non-condensing
0.03%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL1310, CAN/CSA C22.2 No. 223-M91(except for LPC-35-700), IP67 approved ; design refer to TUV EN60950-1
I/P-O/P:3KVAC
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
743.5Khrs min. MIL-HDBK-217F (25 )
148*40*30mm (L*W*H)
0.34Kg; 40pcs/14.6Kg/0.63CUFT
60A/230VAC
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.
8. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minute.
File Name:LPC-35-SPEC 2012-03-20
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
