60W Single Output Switching Power Supply
Features :
LPC-60
series
Constant current design
Universal AC input / Full range
Epoxy encapsulated with IP67 level
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Over current / Over voltage
Fully isolated plastic case
Cooling by free air convection
UL1310 Class 2 power unit, pass LPS
100% full load burn-in test
Low cost, high reliability
Suitable for LED lighting and moving sign applications
2 years warranty
SPECIFICATION
MODEL
DC VOLTAGE
DC VOLTAGE RANGE
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT
INRUSH CURRENT(max.)
LEAKAGE CURRENT
CURRENT LIMIT
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
Note.4
LPS
IP67
LPC-60-1050
48V
9 ~ 48V
1050mA
50.4W
5.0%
1.0%
2.0%
Note.6
500ms, 120ms / 230VAC
( except for 34V )
( for 34V only)
LPC-60-1400
42V
9 ~ 42V
1400mA
58.8W
200mVp-p
LPC-60-1750
34V
9 ~ 34V
1750mA
59.5W
200mVp-p
RIPPLE & NOISE (max.)
Note.2
200mVp-p
500ms, 120ms / 115VAC at full load
50ms/230VAC
90 ~ 264VAC
47 ~ 63Hz
87%
16ms/115VAC at full load
85%
87%
1.2A/115VAC 0.7A/230VAC
COLD STAR 30A/115VAC
60A/230VAC
0.25mA / 240VAC
5% rated output current
Protection type : Constant current limiting type
50.4 ~ 60V
44.1 ~ 56.7V
Protection type : Shut off o/p voltage, clamping by TVS diode
-30 ~ +70
-40 ~ +80
(Refer to output load derating curve)
, 10 ~ 95% RH
20 ~ 90% RH non-condensing
0.03%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL1310 Class 2, CAN/CSA C22.2 No. 223-M91(for 34V only), IP67 approved, design refer to TUV EN60950-1, EN61347-2-13
I/P-O/P:3KVAC
39.1 ~ 45.9V
SAFETY & ISOLATION RESISTANCE
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
EMC
EMI CONDUCTION & RADIATION
Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
EMS IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
732Khrs min. MIL-HDBK-217F (25 )
162.5*42.5*32mm (L*W*H)
0.4Kg; 32pcs/13.8Kg/0.56CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the derating curve for more details.
5. The power supply is considered a component which will be installed a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
File Name:LPC-60-SPEC 2008-12-11
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
