75W Single Output Switching Power Supply
Features :
Universal AC input / Full range
LPS-75
series
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
PWM control and regulated
Small and compact size
Built-in remote ON-OFF control
LED indicator for power on
100% full load burn-in test
2 years warranty
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
PEAK LOAD(10sec.)
OUTPUT
VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY(Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
PROTECTION
OVER VOLTAGE
FUNCTION
REMOTE ON/OFF
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note 5)
EMC EMISSION
EMC IMMUNITY
MTBF
DIMENSION
PACKING
NOTE
LPS-75-3.3
3.3V
15A
0 ~ 16.5A
49.5W
Note.4
54.45W
LPS-75-5
5V
15A
0 ~ 16.5A
75W
82.5W
80mVp-p
4.75 ~ 5.5V
3.0%
1.0%
3.0%
LPS-75-12
12V
6.2A
0 ~ 6.8A
74.4W
81.6W
100mVp-p
11 ~ 13.5V
2.0%
1.0%
2.0%
LPS-75-15
15V
5A
0 ~ 5.5A
75W
82.5W
100mVp-p
13.5 ~ 16.5V
2.0%
1.0%
2.0%
LPS-75-24
24V
3.2A
0 ~ 3.5A
76.8W
84W
120mVp-p
22 ~ 27V
2.0%
1.0%
1.0%
LPS-75-48
48V
1.56A
0 ~ 1.7A
75W
74.88W
120mVp-p
45 ~ 54V
2.0%
1.0%
1.0%
RIPPLE & NOISE (max.)
Note.2
80mVp-p
3 ~3.5V
VOLTAGE TOLERANCE
Note.3
3.0%
1.0%
3.0%
100ms, 35ms/230VAC
60ms/230VAC
90 ~ 264VAC
47 ~ 63Hz
69%
77%
100ms, 35ms/115VAC at full load
12ms/115VAC at full load
127 ~ 370VDC
80%
81%
83%
83%
1.9A/115VAC
1.1A/230VAC
COLD START 18A/115VAC
36A/230VAC
<1mA / 240VAC
115 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.8 ~ 4.45V
5.75 ~ 6.75V
13.8 ~ 16.2V
17.25 ~ 20.25V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
RC+/RC- : 0 ~ 0.8V power on ; 4 ~ 10V power off
-20 ~ +70 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-20 ~ +85
, 10 ~ 95% RH
0.04%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25 / 70% RH
Compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
355Khrs min. MIL-HDBK-217F (25 )
222*55*30mm (L*W*H)
0.3Kg; 48pcs/15.6Kg/1.12CUFT
27.6 ~ 32.4V
57.6 ~ 67.2V
OTHERS
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. 33.3% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power.
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
File Name:LPS-75-SPEC 2011-08-10
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
