65W Single Output Medical Type
Features :
MPS-65
Universal AC input / Full range
Low leakage current
0.3mA
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 45KHz
3 years warranty
series
EN60601-1
IEC60601-1
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT POWER (max.)
OUTPUT
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY(Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
MPS-65-3.3
3.3V
12A
0 ~ 15.2A
39.6W
MPS-65-5
5V
12A
0 ~ 13.8A
60W
100mVp-p
MPS-65-7.5
7.5V
8A
0 ~ 9.6A
60W
100mVp-p
MPS-65-12
12V
5.2A
0 ~ 6A
62.4W
100mVp-p
MPS-65-13.5 MPS-65-15
13.5V
4.7A
0 ~ 5.4A
63.5W
100mVp-p
15V
4.2A
0 ~ 4.8A
63W
100mVp-p
MPS-65-24
24V
2.7A
0 ~ 3A
64.8W
100mVp-p
MPS-65-27
27V
2.4A
0 ~ 2.7A
64.8W
100mVp-p
MPS-65-48
48V
1.35A
0 ~ 1.5A
64.8W
100mVp-p
72W(+3.3V:50W;+5V:69W)with 18CFM min. Forced air convection
2.97 ~ 3.63V 4.5 ~ 5.5V
3.0%
3.0%
1.0%
3.0%
50ms/230VAC
90 ~ 264VAC
47 ~ 440Hz
66%
1.6A/115VAC
74%
76%
0.9A/230VAC
35A/230VAC
77%
78%
79%
80%
80%
80%
1.0%
3.0%
6.75 ~ 8.25V 10.8 ~ 13.2V 12.2 ~ 14.85V 13.5 ~ 16.5V 21.6 ~ 26.4V 24.3 ~ 29.7V 43.2 ~ 52.8V
3.0%
2.0%
2.0%
2.0%
2.0%
2.0%
2.0%
1.0%
3.0%
1.0%
2.0%
1.0%
2.0%
1.0%
2.0%
1.0%
2.0%
1.0%
2.0%
1.0%
2.0%
RIPPLE & NOISE (max.)
Note.2
80mVp-p
800ms, 30ms/230VAC
800ms, 30ms/115VAC at full load
16ms/115VAC at full load
127 ~ 370VDC
COLD START 17A/115VAC
<0.3mA / 264VAC
73 ~ 105W (3.3V:51 ~ 75W)(5V:70 ~ 105W)
rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
3.8 ~ 4.46V 5.75 ~ 6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 15.5 ~ 18.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 31 ~ 36.45V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
-10 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
0.04%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL2601-1, TUV EN60601-1, IEC60601-1 approved
55.2 ~ 64.8V
I/P-O/P:4KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
SAFETY & ISOLATION RESISTANCE
I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH
EMC
EMI CONDUCTION & RADIATION
Compliance to EN55011 (CISPR11) Class B
(Note 4)
HARMONIC CURRENT
EMS IMMUNITY
MTBF
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN60601-1-2, medical level, criteria A
359.7Khrs min. MIL-HDBK-217F (25
127*76*42mm (L*W*H)
0.23Kg; 54pcs/14.6Kg/1.35CUFT
)
OTHERS
DIMENSION
PACKING
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
5. Mounting holes M1 and M2 should be grounded for EMI purposes.
6. Heat Sink HS1,HS2 can not be shorted.
File Name:MPS-65-SPEC 2011-03-31
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
