15W Single Output Switching Power Supply
Features :
Universal AC input/Full range
NES-15
series
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
100% full load burn-in test
2 years warranty
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note 6)
EMC EMISSION
EMC IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
Note.4
Note.5
NES-15-5
5V
3A
0 ~ 3A
15W
4.75 ~ 5.5V
2.0%
1.5%
1.5%
1000ms, 30ms/230VAC
100ms/230VAC
85 ~ 264VAC
47 ~ 63Hz
79%
0.35A/115VAC
COLD START 45A
<2mA / 240VAC
NES-15-12
12V
1.3A
0 ~ 1.3A
15.6W
150mVp-p
10.8 ~ 13.2V
1.0%
0.5%
0.5%
20ms/115VAC at full load
120 ~ 370VDC
81%
0.25A/230VAC
NES-15-15
15V
1A
0 ~ 1A
15W
150mVp-p
13.5 ~ 16.5V
1.0%
0.5%
0.5%
NES-15-24
24V
0.7A
0 ~ 0.7A
16.8W
200mVp-p
21.6 ~ 26.4V
1.0%
0.5%
0.5%
NES-15-48
48V
0.35A
0 ~ 0.35A
16.8W
240mVp-p
43.2 ~ 52.8V
1.0%
0.5%
0.5%
RIPPLE & NOISE (max.)
Note.2
150mVp-p
1000ms, 30ms/115VAC at full load
81%
85%
82%
Above 105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
5.75 ~ 6.75V
13.8 ~ 16.2V
Protection type : Shut off
U1 Tj 140
-20 ~ +60
typically (U1) detect on main control IC
(Refer to "Derating Curve")
17.25 ~ 20.25V
27.6 ~ 32.4V
55.2 ~ 64.8V
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 45 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, CB(IEC60950-1),CCC GB4943 approved
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-1, light industry level, criteria A
563.5Khrs min. MIL-HDBK-217F (25
78*51*28mm (L*W*H)
0.18Kg; 60pcs/11.8Kg/0.46CUFT
)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
File Name:NES-15-SPEC 2011-08-17
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
