5W Single Output Switching Power Supply
Features :
Universal AC input / Full range
Low leakage current <0.5mA
PS-05
series
Protections: Short circuit/Over load /Over voltage/Over temperature
Cooling by free air convection
100% full load burn-in test
Fix switching frequency at 67KHz
Low cost
High reliability
2 years warranty
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME(Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY(Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVER LOAD
PROTECTION
OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
PS-05-5
5V
1A
0 ~ 1.2A
5W
2.0%
1.0%
1.0%
1000ms, 20ms
100ms at full load
85 ~ 264VAC
47 ~ 63Hz
70%
0.15A/115VAC
75%
0.07A/230VAC
75%
76%
76%
120 ~ 370VDC
PS-05-12
12V
0.45A
0 ~ 0.5A
5.4W
120mVp-p
2.0%
1.0%
1.0%
PS-05-15
15V
0.35A
0 ~ 0.4A
5.25W
120mVp-p
2.0%
1.0%
1.0%
PS-05-24
24V
0.22A
0 ~ 0.25A
5.28W
200mVp-p
2.0%
0.5%
0.5%
PS-05-48
48V
0.11A
0 ~ 0.125A
5.28W
200mVp-p
1.0%
0.5%
0.5%
RIPPLE & NOISE (max.)
Note.2
100mVp-p
COLD START 30A/230VAC
<0.5mA / 240VAC
Above 105%
rated output power
Protection type : Hiccup mode, recovery automatically after fault condition is removed
5.75 ~ 6.75V
13.8 ~ 16.2V
17.2 ~ 20.2V
27.6 ~ 32.4V
Protection type : shut off o/p voltage, clamping by zener diode
Tj 140 typically (U1) Detect on main control IC
Protection type : Hiccup mode, recovery automatically after fault condition is removed
-10 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-20 ~ +85
, 10 ~ 95% RH
0.05%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes
EN60950-1 CB Approved by TUV
I/P-O/P:3KVAC
55.2 ~ 64.8V
WITHSTAND VOLTAGE
SAFETY & ISOLATION RESISTANCE
I/P-O/P:100M Ohms/500VDC
EMC
EMI CONDUCTION & RADIATION
Compliance to EN55022 (CISPR22) Class B
(Note 4)
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
OTHERS
MTBF
DIMENSION
PACKING
NOTE
Compliance to EN61000-4-2,3,4,5,6,8,11 Light industry level, criteria A
1271.1Khrs min. MIL-HDBK-217F(25
75*40*20mm (L*W*H)
0.05Kg; 120pcs/6.25Kg/1CUFT
)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:PS-05-SPEC 2009-07-03
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
