320W Single Output with PFC Function
Features :
Universal AC input / Full range
SP-320
series
Built-in active PFC function, PF>0.95
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC Fan
Built-in fan speed control
Fixed switching frequency at 100KHz
3 years warranty
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
SP-320-3.3 SP-320-5
3.3V
55A
0 ~ 60A
181.5W
5V
55A
0 ~ 55A
275W
150mVp-p
SP-320-7.5 SP-320-12
7.5V
40A
0 ~ 40A
300W
150mVp-p
6 ~ 9V
2.0%
0.5%
1.0%
12V
25A
0 ~ 25A
300W
150mVp-p
13.5V
22A
0 ~ 22A
297W
150mVp-p
15V
20A
0 ~ 20A
300W
150mVp-p
24V
13A
0 ~ 13A
312W
150mVp-p
(except for 3.3V, 36V)
SP-320-13.5 SP-320-15 SP-320-24 SP-320-27 SP-320-36 SP-320-48
27V
11.7A
0 ~ 11.7A
315.9W
200mVp-p
36V
8.8A
0 ~ 8.8A
316.8W
220mVp-p
48V
6.7A
0 ~ 6.7A
321.6W
240mVp-p
RIPPLE & NOISE (max.)
Note.2
150mVp-p
3.14 ~ 3.63V 4.5 ~ 5.5V
1.0%
2.0%
0.5%
1.5%
0.5%
1.0%
10 ~ 13.2V 12 ~ 15V
1.0%
1.0%
0.3%
0.5%
0.3%
0.5%
13.5 ~ 18V 20 ~ 26.4V 26 ~ 31.5V 32.4 ~ 39.6V 41 ~ 56V
1.0%
1.0%
1.0%
1.0%
1.0%
0.3%
0.5%
0.2%
0.5%
0.2%
0.5%
0.2%
0.5%
0.2%
0.5%
800ms, 50ms/230VAC
16ms/230VAC
2500ms, 50ms/115VAC at full load
16ms/115VAC at full load
124 ~ 370VDC
PF>0.98/115VAC at full load
83%
86%
86%
86%
87%
88%
87%
89%
VOLTAGE RANGE
Note.5
88 ~ 264VAC
47 ~ 63Hz
FREQUENCY RANGE
POWER FACTOR (Typ.)
INPUT
EFFICIENCY (Typ.)
230VAC
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
AC CURRENT
(Typ.)
115VAC
PF>0.95/230VAC
74%
2.5A
79%
5A
1.5A
2.5A
20A/115VAC
40A/230VAC
<1mA / 240VAC
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
27.6 ~ 32.4V 33.7 ~ 39.2V 45 ~ 52.5V 57.6 ~ 67.2V
3.8 ~ 4.5V 5.75 ~ 6.75V 9.4 ~ 10.9V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V
Protection type : Shut down o/p voltage, re-power on to recover
80
5
(70
5
3.3V,5V only) (TSW1 : detect on heatsink of power transistor)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-20 ~ +65 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
-40 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03%/ (0 ~ 50
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC
(Note 4)
EMC EMISSION
EMC IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
UL60950-1, TUV EN60950-1, CCC GB4943(except for 3.3V, 36V) approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
207K hrs min.
MIL-HDBK-217F (25
)
215*115*50mm (L*W*H)
1.1Kg; 12pcs/14Kg/0.92CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:SP-320-SPEC 2011-08-23
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
