750W Single Output Power Supply
Features :
Universal AC input / Full range
SP-750
AC input active surge current limiting
Built-in active PFC function,PF>0.96
series
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC ball bearing fan
High power density 5.48/inch
3
Built-in constant current limiting circuit
With power good and fail signal output
Built-in remote ON-OFF control
Built-in remote sense function
3 years warranty
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE
SP-750-5
5V
120A
0 ~ 120A
600W
SP-750-12
12V
62.5A
0 ~ 62.5A
750W
120mVp-p
10 ~ 13.5V
1.0%
0.3%
0.5%
16ms/115VAC at full load
127 ~ 370VDC
PF>0.99/115VAC at full load
85%
4.2A/230VAC
45A/230VAC
87%
89%
89%
90%
SP-750-15
15V
50A
0 ~ 50A
750W
120mVp-p
13.5 ~ 16.5V
1.0%
0.3%
0.5%
1500ms, 50ms/115VAC at full load
SP-750-24
24V
31.3A
0 ~ 31.3A
751.2W
120mVp-p
22 ~ 26.4V
1.0%
0.2%
0.5%
SP-750-27
27V
27.8A
0 ~ 27.8A
750.6W
120mVp-p
24 ~ 30V
1.0%
0.2%
0.5%
SP-750-48
48V
15.7A
0 ~ 15.7A
753.6W
120mVp-p
43 ~ 56V
1.0%
0.2%
0.5%
RIPPLE & NOISE (max.)
Note.2
120mVp-p
4.75 ~ 5.5V
VOLTAGE TOLERANCE
Note.3
2.0%
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR (Typ.)
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
FUNCTION
POWER GOOD/FAIL
REMOTE CONTROL
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
0.5%
2.0%
16ms/230VAC
90 ~ 264VAC
47 ~ 63Hz
PF>0.96/230VAC
80%
8.8A/115VAC
27A/115VAC
<2.0mA / 240VAC
1500ms, 50ms/230VAC
105 ~ 125% rated output power
Protection type : Constant current limiting, unit will Hiccup after 3 sec.
5.75 ~ 6.75V
13.8 ~ 16.2V
18 ~ 21V
27.6 ~ 32.4V
Protection type : Shut down o/p voltage, re-power on to recover
85
5
(TSW1 ) detect on heatsink of power transistor
85
5
31 ~ 36.5V
57.6 ~ 67.2V
(TSW2 ) detect on heatsink of power diode
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
50ms/1ms
Note.5
RC+/RC- short power on, open power off
-20 ~ +60 (Refer to output load derating curve)
20~90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH
0.05%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
SAFETY & ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMC
EMI CONDUCTION & RADIATION
Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B
(Note 4)
HARMONIC CURRENT
EMS IMMUNITY
MTBF
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
124K hrs min. MIL-HDBK-217F (25
278*127*63.5mm (L*W*H)
2.9Kg; 6pcs / 18.4Kg / 0.98CUFT
)
OTHERS
NOTE
DIMENSION
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. The power supply unit will have no output if the shorting connector is not assembled between RC+ & RC-.
File Name:SP-750-SPEC 2008-07-21
MEANWELL [ MEAN WELL ENTERPRISES CO., LTD. ]
