when EXEN2=1. When whether TCLK or RCLK is 1, this bit is ignored and the timer is forced to
auto-reload on Timer2 overflow.
TIMER0 (T0) AND TIMER1 (T1)
Mode 0
The timer register is configured as a 13-bit register. As when the count rolls over from all
1s to all 0s, it sets the timer interrupt flag TFx. The counted input is enabled to the timer
when TRx = 1 and either GATE=0 or INTx = 1. Mode 0 operation is the same for Timer0
and Timer1.
0
1
TFx
Interrupt
TLx[4:0] THx[7:0]
0
1
OSC/12
T0 or T1 pin
(sampled)
C//T
TRx
GATE
/INTx
Mode 0
Mode 1
Mode1 is the same as Mode0, except that the timer register is being run with all 16 bits.
0
1
TFx
Interrupt
TLx[7:0] THx[7:0]
0
1
OSC/12
T0 or T1 pin
(sampled)
C//T
TRx
GATE
Mode 1
/INTx
Mode 2
Mode 2 configures the timer register as an 8-bit counter (TLx) with automatic reload. Overflow from
TLx does not only set TFx, but also reloads TLx with the content of THx, which is determined by
user’s program. The reload leaves THx unchanged. Mode 2 operation is the same for Timer0 and
Timer1.
MEGAWIN
MPC89x515A Data Sheet
15
MEGAWIN [ MEGAWIN TECHNOLOGY CO., LTD ]
