欢迎访问ic37.com |
会员登录 免费注册
发布采购

MIC2287BD5 参数 Datasheet PDF下载

MIC2287BD5图片预览
型号: MIC2287BD5
PDF下载: 下载PDF文件 查看货源
内容描述: 1.2MHz的PWM白光LED驱动器,带有过压保护,采用2mm 】 2毫米MLF⑩和薄型SOT -23 [1.2MHz PWM White LED Driver with OVP in 2mm 】 2mm MLF⑩ and Thin SOT-23]
分类和应用: 显示驱动器驱动程序和接口接口集成电路光电二极管
文件页数/大小: 10 页 / 113 K
品牌: MICREL [ MICREL SEMICONDUCTOR ]
 浏览型号MIC2287BD5的Datasheet PDF文件第2页浏览型号MIC2287BD5的Datasheet PDF文件第3页浏览型号MIC2287BD5的Datasheet PDF文件第4页浏览型号MIC2287BD5的Datasheet PDF文件第5页浏览型号MIC2287BD5的Datasheet PDF文件第6页浏览型号MIC2287BD5的Datasheet PDF文件第7页浏览型号MIC2287BD5的Datasheet PDF文件第8页浏览型号MIC2287BD5的Datasheet PDF文件第9页  
MIC2287
Micrel
MIC2287
1.2MHz
PWM White LED Driver with OVP in
2mm
×
2mm MLF™ and Thin SOT-23
General Description
The MIC2287 is a 1.2MHz pulse width modulated (PWM),
boost-switching regulator that is optimized for constant-
current, white LED driver applications. With a maximum
output voltage of 34V and a switch current of over 500mA, the
MIC2287 easily drives a string of up to 8 white LEDs in series,
ensuring uniform brightness and eliminating several ballast
resistors.
The MIC2287 implements a constant frequency, 1.2MHz
PWM control scheme. The high frequency PWM operation
saves board space by reducing external component sizes.
The added benefit of the constant frequency PWM scheme
as opposed to variable frequency topologies is much lower
noise and input ripple injected back to the battery source.
To optimize efficiency, the feedback voltage is set to only
95mV. This reduces the power dissipation in the current set
resistor and allows the lowest total output voltage, hence
minimal current draw from the battery.
The MIC2287 is available with 3 levels of overvoltage protec-
tion, 15V, 24V, and 34V. This allows designers to choose the
smallest possible external components with the appropriate
voltage ratings for their applications.
The MIC2287 is available in low profile Thin SOT-23 5-lead
and an 8-lead 2mm
×
2mm MLF™ package options. The
MIC2287 has a junction temperature range of –40°C to
+125°C.
All support documentation can be found on Micrel’s web
site at www.micrel.com.
Features
2.5V to 10V input voltage
Output voltage up to 34V
Over 500mA switch current
1.2 MHz PWM operation
95mV feedback voltage
Output Overvoltage Protection (OVP)
Options for 15V, 24V, and 34V OVP
<1% line and load regulation
<1µA shutdown current
Over-temperature protection
UVLO
Low profile Thin SOT-23-5 package option
8-lead 2mm
×
2mm MLF™ package option
–40°C to +125°C junction temperature range
Applications
• White LED driver for backlighting:
- Cell phones
- PDAs
- GPS systems
- Digital cameras
- MP3 players
- IP phones
• Photo flash LED driver
• LED flashlights
• Constant current power supplies
Typical Application
10µH
CMDSH-3
10µH
CMDSH-3
MIC2287BD5
5
MIC2287-34BML
1
1-Cell
Li Ion
VIN
EN
SW
FB
GND
2
VIN
0.22µF
95mV
SW
OVP
FB
GND
95mV
6.3Ω
0.22µF
1µF
4
3
1-Cell
Li Ion
1µF
EN
6.3Ω
3-Series White LED Driver in Thin SOT-23
MLF and
Micro
LeadFrame are trademarks of Amkor Technology, Inc.
6-Series White LED Driver
with Output OVP in 2mm
×
2mm MLF™-8
Micrel, Inc. • 1849 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
August 2004
1
M0510-081104