Micron Confidential and Proprietary
Preliminary
‡
MT9E001: 1/2.5-Inch 8-Mp Digital Image Sensor
Features
1/2.5-Inch CMOS Digital Image Sensor
MT9E001
Refer to the latest MT9E001 data sheet on Micron’s Web site:
www.mircon.com/imaging
Features
•
•
•
•
•
•
•
•
•
Table 1:
Key Performance Parameters
Value
DigitalClarity
®
CMOS imaging technology
Superior low-light performance
Low dark current
Simple two-wire serial interface
Auto black level calibration
Support for external mechanical shutter
Support for external LED or Xenon flash
High frame rate preview mode with arbitrary
downsize scaling from maximum resolution
Programmable controls: gain, frame size/rate,
exposure, left-right and top-bottom image reversal,
window size, and panning
Data interface: parallel
On-chip phase-locked loop (PLL)
Bayer pattern down-size scaler
Four channel shading correction (SC)
Parameter
Optical format
Full resolution
Pixel size
Chief ray angle
Color filter array
Shutter type
•
•
•
•
Applications
• Digital still cameras
• Cellular phones
1/2.5-inch (4:3)
3,264 x 2,448 pixels
1.75µm x 1.75µm
10.19 maximum
RGB Bayer pattern
Electronic rolling shutter
(ERS) with global reset
release (GRR)
Input clock frequency
6−48 MHz
Maximum data rate/master 96 Mbps
clock
Full
11 fps
Frame rate
resolution
Video mode 30 fps
Analog
2.4−3.1V (2.8V nominal)
Supply
Digital
1.7−1.9V (1.8V nominal)
voltage
I/O
1.8 or 2.8V
PLL
2.4−3.1V (2.8V nominal)
ADC resolution
12-bit
Responsivity
0.3 V/lux-sec (at 550nm)
(preliminary)
Dynamic range
70dB (preliminary)
SNR
MAX
38.9dB (preliminary)
Full
650mW (typical)
Power
resolution
consumption Video mode 594mW (typical)
Standby
45µW (typical, EXTCLK
disabled)
Operating temperature
–30°C to +70°C (at junction)
Package
48-pin iLCC
Ordering Information
Table 2:
Available Part Numbers
Description
48-pin iLCC
Part Number
MT9E001I12STC
PDF: 09005aef8210fa55/Source: 09005aef8210f91a
MT9E001__1.fm - Rev. C 10/06 EN
1
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2006 Micron Technology, Inc. All rights reserved.
‡Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by
Micron without notice. Products are only warranted by Micron to meet Micron’s production data sheet specifications.
MICRON [ MICRON TECHNOLOGY ]
