Preliminary
‡
MT9V135: SOC VGA Digital Image Sensor
Features
1/4-Inch System-On-A-Chip (SOC) VGA
NTSC/PAL CMOS Digital Image Sensor
MT9V135C12STC (Pb-Free CLCC)
• Micron
®
DigitalClarity
®
CMOS imaging technology
• System-On-a-Chip (SOC)—Completely integrated
camera system
• NTSC/PAL (true two field) analog composite video
output
• ITU-R BT.656 parallel output (8-bit, interlaced)
• Simultaneous composite and digital video outputs
(simplifies focus and setup of network cameras
• Serial LVDS data output
• Low power, interlaced scan CMOS image sensor
• Supports use of external devices for addition of
custom overlay graphics
• Superior low-light performance
• On-chip image flow processor (IFP) performs
sophisticated processing
• Color recovery and correction, sharpening, gamma,
lens shading correction, and on-the-fly defect
correction
• Automatic features:
–
Auto exposure
–
Auto white balance (AWB)
–
Auto black reference (ABR)
–
Auto flicker avoidance
–
Auto color saturation
–
Auto defect identification and correction
• Simple two-wire serial programming interface
Features
Table 1:
Parameter
Key Performance Parameters
Typical Value
Applications
•
•
•
•
•
•
•
Security cameras
900 MHz and 2.4 GHz wireless cameras
Composite video and digital video cameras
CCTV security cameras
Smart cameras
Evidence quality cameras
Cameras using active or passive overlay
1/4-inch (4:3)
3.63mm(H) x 2.78mm(V)
4.57mm diagonal
Active pixels
640H x 480V
NTSC output
720H x 486V
PAL output
720H x 576V
Pixel size
5.6µm x 5.6µm
Color filter array
RGB Paired Bayer pattern
Shutter type
Electronic rolling shutter (ERS)
Maximum data rate
13.5 Mp/s
master clock
27 MHz
Frame rate (VGA 640H x 30 fps at 27 MHz (NTSC)
480V)
25 fps at 27 MHz (PAL)
Integration time
16µs–33ms (NTSC)
(composite video output) 16µs–40ms (PAL)
ADC resolution
10-bit, on-chip
Responsivity
5 V/lux-sec (550nm)
Pixel dynamic range
70dB
39dB
SNR
MAX
Supply
I/O digital
2.5–3.1V (2.8V nominal)
voltage
Core digital 2.5–3.1V (2.8V nominal)
Analog
2.5–3.1V (2.8V nominal)
Power consumption
320 mW @ 2.8V, 25°C
1
–30°C to +70°C
Operating temperature
Packaging
48-pin CLCC
Note: 1. Customers requiring a similar part with greater
temperature range should consider using the
Micron MT9V125.
Optical format
Active imager size
Table 2:
Ordering Information
Description
48-pin CLCC ES, Pb-Free
Demo kit
Demo kit headboard
Part Number
MT9V135C12STC ES
MT9V135C12STCD
MT9V135C12STCH
09005aef82c99cd/Source:09005aef824c99db
MT9V135_LDS_1.fm - Rev. B 3/07 EN
1
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2006 Micron Technology, Inc. All rights reserved.
‡Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by
Micron without notice. Products are only warranted by Micron to meet Micron’s production data sheet specifications.