PRODUCT INFORMATION
CDC 3207G
Development Tools
◆
Evaluation chip CDC 3205G featuring
– ETM via embedded emulation JTAG
– ROM/Flash emulation with external
SRAM (up to 8 MBytes)
◆
Evaluation Board (EVB) including the
CDC 3205G for evaluation and debug-
ging of embedded systems
◆
Application Board (APB) for Flash mem-
ory programming
◆
Probe for PQFP128
◆
Software environment (compiler, linker,
assembler) from 3
rd
party vendors
◆
RTOS from 3
rd
party vendors
◆
CAN protocol stacks
Logic Analyzer
JTAG
Probe
JTAG
JTAG
May/2005
ETM
Trace Probe
EVB
Fig. 1:
Development tool setup
System Architecture
The Car Dashboard Controller CDC 3207G
contains an embedded ARM7TDMI proces-
sor which operates at a maximum clock fre-
quency of 50 MHz.
The internal high-speed bus connects the
following peripherals to the ARM7TDMI pro-
cessor:
◆
ICU (Interrupt Control Unit)
◆
SRAM
◆
DMA
The 16/32-bit bus connects to Flash and
boot ROM. All other peripherals are con-
nected to the I/O bus. All I/O ports have
multiple functions to obtain utmost flexibility.
A total of 102 GPIOs can be selected.
The built-in ERM delivers superb EMI
results reducing the peak values by up to
10 dBµV.
The CDC 3207G is fully pin- and software-
compatible with all other members of the
CDC 32xxG family.
HPorts
VREFINT
VREF
AVDD
AVSS
BVDD
UVDD
UVSS
FVDD
FVSS
VDD
VSS
Reset
Test
Watchdog Clock
PLL/ERM
RTC
Power Saving
3.3-V Reg.
2.5-V Reg.
ARM7TDMI
CPU
2.5-V Reg.
Wait Comp
40-Input
Interrupt Controller
32 KB SRAM
DMA Contr.
Bus Controller
PPorts
P0.6 Comp
Bandgap Ref.
18
Bridge
512 KB Flash
8 KB Boot ROM
JTAG Interface
Test / Debug
10-Bit ADC
Bridge
Patch Module
UARTS
2
×
UART
UARTS
LCD Control
UARTS
Audio Module
UARTS
Clock Out 0,1
PFM 0/1
7
×
Stepper Motor
Module
UARTS
16-Bit CCC 0
UARTS
CAPCOM 0,1,2,3
UARTS
16-Bit CCC 1
UARTS
5
CAPCOM 4,
1
UARTS
×
16-Bit Timer
32
UARTS
2
×
SPI
UARTS
4
×
CAN
UARTS
DIGITBus
UARTS
2
×
I²C Bus
6
UARTS
×
8/16-Bit PWM
UARTS
4
×
8-Bit Timer
UPorts
52
Fig. 2:
Block diagram of the CDC 3207G
All information and data contained in this product information are without any commitment, are not to be consid-
ered as an offer for conclusion of a contract, nor shall they be construed as to create any liability. Product or
development sample availability and delivery are exclusively subject to our respective order confirmation form. By
this publication, Micronas GmbH does not assume responsibility for patent infringements or other rights of third
parties which may result from its use.
No part of this publication may be reproduced, photo-
copied, stored on a retrieval system, or transmitted
without the express written consent of Micronas GmbH.
Edition May 18, 2005; Order No. 6251-596-3PI
Micronas GmbH
⋅
Hans-Bunte-Strasse 19
⋅
D-79108 Freiburg (Germany)
⋅
P.O. Box 840
⋅
D-79008 Freiburg (Germany)
Tel. +49-761-517-0
⋅
Fax +49-761-517-2174
⋅
E-mail: docservice@micronas.com