8700 E. Thomas Road
Scottsdale, AZ 85252
Phone: (480) 941-6300
Fax:
(480) 947-1503
FEATURES:
•
•
•
•
•
ECONOMICAL SERIES
AVAILABLE IN BOTH UNIDIRECTIONAL AND BI-DIRECTIONAL CONSTRUCTION
5.0 TO 170 STAND-OFF VOLTAGE AVAILABLE
500 WATTS PEAK PULSE POWER DISSIPATION
QUICK RESPONSE
SA5.0
thru
SA170A
DESCRIPTION:
This Transient Voltage Suppressor is an economical, molded, commercial product
used to protect voltage sensitive components from destruction or partial degradation.
-12
The response time of their clamping action is virtually instantaneous (1 x 10
seconds) and they have a peak pulse power rating of 500 watts for 1 ms as depicted in
Figure 1 and 2. Microsemi also offers a great variety of other Transient Voltage
Suppressor's to meet higher and lower power demands and special applications.
5.0 thru 170 volts
500 Watts
Transient Voltage
Suppressors
DO-41
Peak Pulse Power Dissipation at 25°C: 500 Watts
°
Steady State Power Dissipation: 2.5 Watts at T
L
= +75°C
°
MAXIMUM RATINGS:
2 x
∅
.032 ± .002
[.81 ± .05]
3/8" Lead Length
t
clamping
(0 volts to BV Min.):
-12
-9
Unidirectional <1x10 Seconds: Bi-directional <5x10 Seconds.
Operating and Storage Temperature: -55° to +175°C
°
°
TYPICAL CHARACTERISTIC CURVES
PEAK PULSE POWER (Ppp) OR CONTINUOUS
POWER IN PERCENT OF 25°C RATING
100
PULSE CURRENT IN
PERCENT OF Ipp
Peak Value Ipp
100
Pulse Time Duration
(tp) is Defined as that
point where Ip decays
to 50% of
I surge
∅
.107
[2.72]
max.
.205
[5.21]
MAX.
2 X1.10
[27.94]
MIN.
POLARITY
Mark {cathode}
75
Peak Power
(Single pulse)
50
50
Continuous
Average Power
Lead Length = 3/8"
1
25
2
3
4
TIME (t) IN MILLISECONDS
NOTE: DIMENSIONS IN [ ] =MILLIMETERS
FIGURE 2
0
50
100
150 175
PULSE WAVEFORM FOR
EXPONENTIAL SURGE
T
L
LEAD TEMPERATURE °C
FIGURE 1
DERATING CURVE
MECHANICAL
CHARACTERISTICS
CASE: Void free transfer
molded thermosetting
plastic.
FINISH: Readily solderable.
POLARITY: Band denotes
cathode. Bi-directional not
marked.
WEIGHT: 0.7 gram (Appx.).
MOUNTING POSITION: Any
MSC1400.PDF 03-20-00