ID100
LOW LEAKAGE
PICO-AMP DUAL DIODE
Linear Systems replaces discontinued Intersil ID100
The ID100 is a low leakage Monolithic Dual Pico-Amp Diode
The ID100 low-leakage monolithic dual diode provides a
superior alternative to conventional diode technology
when reverse current (leakage) must be minimized. In
addition the monolithic dual construction allows
excellent capacitance matching per diode. The ID100
features a leakage current of 0.1 pA and is well suited
for use in applications such as input protection for
operational amplifiers.
FEATURES
DIRECT REPLACEMENT FOR INTERSIL ID100
REVERSE LEAKAGE CURRENT
REVERSE BREAKDOWN VOLTAGE
REVERSE CAPACITANCE
ABSOLUTE MAXIMUM RATINGS (Note 1)
@ 25°C (unless otherwise noted)
Maximum Temperatures
Storage Temperature
Operating Junction Temperature
Maximum Power Dissipation
Continuous Power Dissipation
Maximum Currents
Forward Current
Reverse Current
Maximum Voltages
Reverse Voltage
Diode to Diode Voltage
I
R
= 0.1pA
BV
R
≥ 30V
C
rss
= 0.75pF
ID100 Benefits:
Negligible Circuit Leakage Contribution
Circuit “Transparent” Except to Shunt
High-Frequency Spikes
Simplicity of Operation
‐65°C to +200°C
‐55°C to +150°C
300mW
20mA
100µA
30V
±50V
ID100 Applications:
Op Amp Input Protection
Multiplexer Overvoltage Protection
ID100 ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted)
SYMBOL
CHARACTERISTICS
MIN.
TYP.
BV
R
V
F
I
R
|I
R1
‐I
R2
|
C
rSS
Note 1 - Absolute maximum ratings are limiting values above which ID100 serviceability may be impaired.
Note 2 - Design reference only, not 100% tested
TO-78 (Bottom View)
Available Packages:
MAX.
UNITS
CONDITIONS
FIGURE 1 – Operational Amplifier Protection
Input Differential Voltage limited to 0.8V (typ) by Diodes ID100
D
1
and D
2
. Common Mode Input voltage limited by Diodes ID100
D
3
and D
4
to ±15V.
FIGURE 2 – Sample & Hold Circuit
Typical Sample and Hold circuit with clipping. ID100 diodes
reduce offset voltages fed capacitively from the ID100 switch
gate.
Micross Components Europe
Tel: +44 1603 788967
Email:
chipcomponents@micross.com
Web:
http://www.micross.com/distribution
ID100 in TO-78
ID100 available as bare die
Please contact Micross for
full package and die dimensions
Note pins 3 & 5 must not be connected, in
any fashion or manner, to any circuit or node
Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or
other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems.
Micross Components Ltd, United Kingdom, Tel: +44 1603 788967, Fax: +44 1603788920, Email:
baredie@micross.com
Web:
www.micross.com/distribution.aspx
MICROSS [ MICROSS COMPONENTS ]
