53024
SPST SOLID-STATE RELAY
Mii
HYBRID MICROELECTRONICS
PRODUCTS DIVISION
Features:
•
•
•
•
•
•
•
•
•
Replacement for 690-2
SPST, Normally Open
1000 V RMS Optical Isolation
CMOS or TTL Compatible Input
Power FET Output – Low On-state Resistance
Full Military Temperature Operation:
-55ºC to +105ºC
Military Environmental Screening Available
Built and Tested to MIL-PRF-28750 utilizing the
test methods of MIL-STD-883C
Qualified to 86001-001
Applications:
•
•
•
•
•
Low level power control
Current loop switches
Isolated line driver
Servo and synchro resolver control
Military/Space general purpose switching
DESCRIPTION
The 53024 is a military SPST solid-state relay. This small, light-weight device is resistant to damage from shock and
vibration, and immune to contact-related problems (contamination, arcing) associated with mechanical equivalents.
Optical coupling between the input and output stages provides effective isolation up to 1000 volts AC RMS. Power FET
outputs eliminate bipolar offset, and minimize output voltage drop.
The control logic is TTL and CMOS compatible, and will accommodate bias supplies between 3.8 and 32 VDC. A built-in
Schmitt trigger increases noise margin when using the device in the CMOS input mode.
This solid-state relay is ideal for use in military systems, or wherever high reliability, low power actuation, and light weight are
design considerations. Applications include general purpose signal switching and electronic load control.
ABSOLUTE MAXIMUM RATINGS
Isolation Voltage ................................................................................................................................................. 1000 VAC RMS
Operating Temperature ............................................................................................................................ -55ºC to +105ºC Case
Storage Temperature .........................................................................................................................................-55ºC to +125ºC
Micropac Industries
cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac
reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION
•
905 E. Walnut St., Garland, TX 75040
•
(972) 272-3571
•
Fax (972) 494-2281
www.micropac.com
E-MAIL:
hybridsales@micropac.com
05/18/01
MII [ Micropac Industries ]
