66058
SINGLE/DUAL CHANNEL, LOW-INPUT CURRENT,
OPTOCOUPLER (Electrically similar to 6N140)
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
•
•
•
•
DSCC Approved 8978501PX (Dual) and
8981001PX (Single)
High current transfer ratio: 1000% typical
1500 Vdc isolation test voltage
Low input current requirement: 0.5mA
Applications:
•
•
•
•
•
Telephone ring detection
Voltage level shifting
Isolated receiver input
Communication systems
Medical systems
DESCRIPTION
The
66058
single/dual optocoupler utilizes infrared LEDs optically coupled to high gain photodarlington detectors. This unique
optocoupler provides high CTR and low leakage current over the full military temperature range (-55
°
to +125°C). The 66058
is a 8 pin dual-in-line, hermetically sealed package and is available in standard and screened versions or tested to customer
specifications.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature........................................................................................................................................... -65°C to +150°C
Operating Free-Air Temperature Range ............................................................................................................. -55°C to +125°C
Lead Solder Temperature.........................................................................................260
°
C for 10s (1.6mm below seating plane)
Peak Forward Input Current (each channel) ................................................................................................ 20mA (1ms duration)
Average Forward Input Current ........................…............(see Note 1) ...............................................................................10mA
Reverse Input Voltage ...............................................................................................................................................................5V
Output Current - I
O
(each channel) ......................................................................................................................................40mA
Output Power Dissipation (each channel) ........................(see Note 2) ..............................................................................50mW
Supply Voltage - V
CC
..........................................................(see Note 3)........................................................................0.5 to 20V
Output Voltage - V
O
(each channel).……........................(see Note 3) ...................................................................... -0.5 to 20V
Package Dimensions
0.370 [9.040]
0.390 [9.90]
8
REAR VIEW
7
6
5
Schematic Diagram
DATE CODE
NC 1
A 2
8
7
6
Vcc
EN
V0
YYWW
USA
XXXX
1
2
3
4
K 3
NC 4
5 GND
PIN ONE
TYPE NUMBER
0.320 [8.13]MAX
0.280 [7.11]
0.310 [7.88]
PIN ONE
0.007 [0.18]
0.013 [0.33]
0.90 [2.28]
0.110 [2.80]
END VIEW
0.170 [4.32]MAX
A 1
K 2
K 3
A 4
8
Vcc
0.020 [0.51] MIN
.020 [0.51] MAX
7 V01
6 V02
5 GND
SIDE VIEW
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
Notes:
1. Derate I
F
at 0.33 mA/
°
C above 110°C.
2. Collector output power plus one half of the total supply power is total output power. Derate at 1.66mW/°C above 110°C.
3. The lowest total I
OH
over temperature is developed by keeping V
CC
as low as possible, but greater that 2 volts. The
negative voltage at the detector side should be applied to Pin 10.
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION
•
725 E. Walnut St., Garland, TX 75040
•
(972) 272-3571
•
Fax (972) 487-6918
www.micropac.com
E-MAIL: optosales@micropac.com
3 - 36