PIN RECEPTACLES
for .022” - .034” diameter pins
and .025” square pins
PINS
0291
0293
0287
0285
0287-0-15-XX-16-XX-10-0
Solder mount in ±06ꢀ min± mounting hole
Also available on 8mm wide carrier
tape: 3,2ꢀ0 parts per 13” reel±
0291-0-15-XX-16-XX-10-0 0293-0-15-XX-16-XX-10-0
0285-0-15-XX-16-XX-10-0
Solder mount in ±06ꢀ min±
mounting hole
Hex press-fit in ±067 plated
thru hole
Press-fit in±067 mounting hole
Order as: 0287-0-ꢀ7-XX-16-XX-10-0
0284
8114
0407
0415
0415-0-15-XX-16-XX-10-0
Solder mount in ±063 min± mounting hole
Also available on 24mm wide carrier
tape: 1,ꢀ00 parts per 13” reel±
0284-0-15-XX-16-XX-10-0 8114-0-15-XX-16-XX-04-0 0407-0-15-XX-16-XX-04-0
Solder mount in ±070 min±
mounting hole
Press-fit from underside of pc board
into ±06ꢀ mounting hole
Press-fit in ±066 mounting hole
Order as: 041ꢀ-0-ꢀ7-XX-16-XX-10-0
0303
0306
0273
7520
0303-0-19-XX-16-XX-10-0 0306-0-19-XX-16-XX-10-0 0273-0-15-XX-16-XX-10-0 7520-0-15-XX-16-XX-10-0
Wire Termination
Wire Termination
Press-fit in ±078 mounting hole
Press-fit in ±066 mounting hole
Press-fit in ±067 mounting hole
#18 gage crimp barrel
ORDER CODE: XXXX - X - 1X - XX - 16 - XX - XX - 0
BASIC PART #
SPECIFICATIONS
SHELL MATERIAL:
Brass Alloy 360, 1/2 Hard
SPECIFY SHELL FINISH:
SPECIFY CONTACT FINISH:
01 200μ” TIN/LEAD OVER NICKEL
80 200μ” TIN OVER NICKEL ꢀ
27 30μ” GOLD OVER NICKEL ꢀ
01 200μ” TIN/LEAD OVER NICKEL
80 200μ” TIN OVER NICKEL ꢀ
15 10μ” GOLD OVER NICKEL ꢀ
CONTACT MATERIAL:
Beryllium Copper Alloy 172, HT
DIMENSION IN INCHES
TOLERANCES ON:
LENGTHS:
DIAMETERS: ± ±002
ANGLES: ± 2ꢁ
± ±00ꢀ
CONTACT
#16 CONTACT (DATA ON PAGE 221)
RoHS
2002/95/EC
www.mill-max.com
ꢀ
516-922-6000
146
MILL-MAX [ MILL-MAX MFG. CORP. ]