欢迎访问ic37.com |
会员登录 免费注册
发布采购

40REC0770-QB-EV1 参数 Datasheet PDF下载

40REC0770-QB-EV1图片预览
型号: 40REC0770-QB-EV1
PDF下载: 下载PDF文件 查看货源
内容描述: 35.0-45.0 GHz的砷化镓接收QFN封装,为7x7毫米 [35.0-45.0 GHz GaAs Receiver QFN, 7x7 mm]
分类和应用:
文件页数/大小: 7 页 / 229 K
品牌: MIMIX [ MIMIX BROADBAND ]
 浏览型号40REC0770-QB-EV1的Datasheet PDF文件第1页浏览型号40REC0770-QB-EV1的Datasheet PDF文件第2页浏览型号40REC0770-QB-EV1的Datasheet PDF文件第3页浏览型号40REC0770-QB-EV1的Datasheet PDF文件第4页浏览型号40REC0770-QB-EV1的Datasheet PDF文件第6页浏览型号40REC0770-QB-EV1的Datasheet PDF文件第7页  
35.0-45.0 GHz GaAs Receiver  
QFN, 7x7 mm  
October 2006 - Rev 05-Oct-06  
40REC0770-QB  
App Note [1] Biasing - The device is operated by biasing VD=4.0V with ID=180 mA. Additionally, a mixer and doubler bias are also required  
with VG2=-0.5V. Adjusting Vg2 above or below this value can adversely affect conversion gain, image rejection and intercept point  
performance. It is recommended to use active biasing to keep the currents constant as the RF power and temperature vary; this gives the  
most reproducible results. Depending on the supply voltage available and the power dissipation constraints, the bias circuit may be a single  
transistor or a low power operational amplifier, with a low value resistor in series with the drain supply used to sense the current.The gate of  
the pHEMT is controlled to maintain correct drain current and thus drain voltage.The typical gate voltage needed to do this is -0.3V.Typically  
the gate is protected with Silicon diodes to limit the applied voltage. Also, make sure to sequence the applied voltage to ensure negative  
gate bias is available before applying the positive drain supply.  
MTTF  
MTTF is calculated from accelerated life-time data of single devices and assumes an isothermal back-plate.  
40REC0770-QB, MTTF (yrs) vs. Backplate Temperature (°C)  
1.E+05  
1.E+04  
1.E+03  
1.E+02  
1.E+01  
1.E+00  
55  
65  
75  
85  
95  
Temperature (°C)  
Bias Conditions: Vd=4.0V, Id=180 mA  
Typical Application  
BPF  
40REC0770-QB  
IF Out  
2 GHz  
Coupler  
RF IN  
37.0-39.5 GHz  
LNA  
IR Mixer  
Buffer  
AGC Control  
X2  
LO(+2.0dBm)  
17.5-18.75 GHz (USB Operation)  
19.5-20.75 GHz (LSB Operation)  
Mimix Broadband MMIC-based 35.0-45.0 GHz Receiver Block Diagram  
(Changing LO and IF frequencies as required allows design to operate as high as 46 GHz)  
Mimix Broadband's 30.0-46.0 GHz 40REC0770-QB GaAs MMIC Receiver can be used in saturated radio applications and linear modulation  
schemes up to 128 QAM.  
Page 5 of 7  
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099  
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com  
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.  
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept  
their obligation to be compliant with U.S. Export Laws.