0.05-4.0 GHz
Dual High Dynamic Range Amplifier
August 2007 - Rev 11-Aug-07
CDQ6004-QS
Features
Matched Pair of Amplifiers for Optimum Balanced Design
0.05 to 4.0 GHz Frequency Range
44 dBm Output IP3 (Balanced configuration)
41 dBm Output IP3 (Single-ended configuration)
15 dB Gain @ 2 GHz
23 dBm P1dBm
2.1 dB Noise Figure
RoHS Compliant 4X4 QFN Package
Single Positive Supply
+3V to +5V Voltage Rail
General Description
The CDQ6004-QS is a dual high dynamic range amplifier designed
for applications operation within the 0.05 to 4.0 GHz frequency
range. Co-located matched amplifiers are assembled in the 4mm X
4mm QFN package. The low-cost, surface-mount, 16 terminal, plastic
package is RoHS compliant. The CDQ6004-QS is an ideal solution for
implementing balanced or push-pull designs. The amplifier can also
be used for dual-band operation where single-ended design is used
for each band. The amplifier has the flexibility of being optimized
for a number of wireless applications. The combination of low noise
figure and high IP3 at the same bias point make it an ideal transmit
or receive solution when used in applications including CATV
operating from 50 to 850 MHz, cellular and PCS (personal
communications service) operating from 0.8 to 2.2 GHz; MMDS
(multichannel multipoint distribution systems) operating from 2.2
to 2.7 GHz; and WLAN (wireless LAN) operation at 2.4 GHz. All
devices are 100% RF and DC tested.
Absolute Maximum Ratings
Supply Voltage
RF Input Power
Storage Temperature (Tstg)
Junction Temperature
Operating Temperature
Thermal Resistance
+6.0 V
+20 dBm
-55 ºC to +125 ºC
150 ºC
-40 ºC to +85ºC
52 ºC/W
Operation of this device above any of these parameters may cause damage.
Typical Parameters
Parameter
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Noise Figure
Output P1dB
0.9
16.5
-13
-16
42
2.1
+23
Typical
2
15
-11
-12
41
2.1
+23
2.4
14.9
-20
-11
40.5
2.6
+24
Units
GHz
dB
dB
dB
dBm
dB
dBm
Unless otherwise specified, the following specifications are guaranteed at room temerpature in a Mimix fixture.
Electrical Characteristics
(T = 25ºC)
Parameter
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Noise Figure
Output P1dB
Operating Current Range
Supply Voltage
Condition
Externally Matched
Externally Matched
Externally Matched
Typical values reflect performance in recommended application circuit @ +5V.
Units
GHz
dB
dB
dB
dBm
dB
dBm
mA
V
Min.
0.25
13.5
Typ.
15
-10
-10
41
2.1
23
160
5.0
Max.
3.0
38
130
200
Notes:
1. T = 25ºC, Frequency = 2 GHz, 50 Ohm system.
2. Each single ended amplifier is tested separately.
3. OIP3 is measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
4. Slight performance degredation is expected over temperature.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 10
Characteristic Data and Specifications are subject to change without notice.
©2007
Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
MIMIX [ MIMIX BROADBAND ]
