36.0-42.0 GHz GaAs Transmitter
SMT, 7x7 mm
April 2009 - Rev 15-Apr-09
U1006-QB
App Note [3] USB/LSB Selection
-
USB
LSB
For Upper Side Band operation (USB):
With IF1 and IF2 connected to the
direct port (0º) and coupled port (-90º)
respectively as shown in the diagram,
the USB signal will reside on the
input port. The isolated port must be
loaded with 50 ohms.
Coupled Port
Direct Port
2F1
2F2
An alternate method of Selection of USB or LSB:
For Lower Side Band operation (LSB):
With IF1 and IF2 connected to the
direct port (0º) and coupled port (-90º)
respectively as shown in the diagram,
the LSB signal will reside on the isolated
port. The input port must be loaded
with 50 ohms.
USB
LSB
In Phas e Combiner
In Phas e Combiner
-90
o
-90
o
IF2
IF1
Factory Automation and Identification
Mimix
Designator
-QB
Package
Type
QFN (7x7mm)
Number of
leads offered
28
W Tape
Width
16mm
12mm
IF2
P
0
Hole
Pitch
4mm
IF1
Reel
Diameter
329mm (13in)
Units
per Reel
1000
P
1
Component
Pitch
Tape and Reel Packaging per the
following
conditions:
Tape Width:
Tape Pitch (part to part):
Component Orientation:
Reel Diameter:
16 mm
12 mm
Parts are to be oriented with the PIN 1 closest to the tape's round sprocket holes on the tape’s trailing edge.
329 mm (13 inch)
Note: Tape and Reel packaging is ordered with a -000T suffix. Package is available in 500 unit reels through designated sales channels.
Minimum order quantities should be discussed with your local sales representative.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 8 of 9
Characteristic Data and Specifications are subject to change without notice.
©2009
Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
MIMIX [ MIMIX BROADBAND ]
