ML2002 参数 Datasheet PDF下载

ML2002 Preliminary

Timing Diagram for slave mode display

Functional Description

The display data should be input in reverse order from SEG48, SEG41… SEG2, SEG1 for proper display

of data.

i) Internal Power on reset

At power on the ML2002 will reset the internal register and counter as follows.

1. The display Data RAM is cleared.

2. The clock register will be cleared, the alarm will be disabled by setting the AE to logic 1, and the

RTC stops running by setting STOP to 1.

3. The command/data decoder will be reset to initial state.

P4/29

Preliminary, April 2007