Part Number Guide
Frequency
MVL
Frequency
Stability
020 = ±20 ppm
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Operating
Temperature
Pullability
Linearity
Blank = ±20% max
X = ±5% max
Y = ±10% max
Z = ±15% max
Output
P = PECL
L = LVPECL
V = LVDS
Supply Voltage
2 = +2.5 VDC
3 = +3.3 VDC
5 = +5.0 VDC
Symmetry *
A = ±200 ppm min
C = ±100 ppm min
D = ±50 ppm min
P = ±25 ppm min
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
55 = -55°C to +125°C
Blank = 40%/60%
A = 45%/55%
B = 47.5%/52.5%
*Option B (47.5/52.5%) Available up to 500MHZ only
Please Consult with MMD Sales Deparment for any other Parameters or Options
Mechanical Details
9.80 [.386]
MAX
4.70 [.185]
MAX
0.84 [.033]
7.87 [.310]
PIN CONNECTIONS
VOLTAGE CONTROL
ENABLE/DISABLE
GROUND
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
3
2
1
4
5
6
14.00 [.551]
MAX
5.08 [.200]
2.54 [.100]
5.08 [.200]
1.02 [.040]
OUTPUT
COMP. OUTPUT
SUPPLY VOLTAGE
2.54 [.100]
2.50 [.098]
DENOTES PIN 1
Dimension in Brackets are in Inches
External Bypass Capacitor is Recommended
Recommended
Land Pattern
Tape & Reel Dimensions
PITCH
Tape Width
REEL DIA
NOTES: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters [inch].
3. Tolerances are ±0.1 [.004] mm unless otherwise specified.
4. Do not scale drawing.
4.00 [.157]
12.00 [.471]
180 [7.0]
PITCH
TAPE WIDTH
REEL DIA
QTY PER REEL
500
Q1
PIN 1 ORIENT.
DIRECTION OF FEED
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Revision:
10/29/10 D
Pg 2 of 2
Revisions only with customer approval