Part Number Guide
MVS
C
V
Frequency
3.2 x2.5 Ceramic SMD
4 Pads
Symmetry
Blank = 40/60%
A = 45/55%
Frequency
Stability
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
150 = ±150 ppm
Pin 1 Connection
V = Voltage Control
Output
C = CMOS
Supply Voltage
3 = +3.3VDC
2 = +2.5VDC
1 = +1.8VDC
Operating Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Pullability
B = ±100 ppm
C = ±150 ppm
Value Added Options
Blank = No Added Options
T = Tape and Reel
Please Consult with MMD Sales Department for any other Parameters or Options
Mechanical Details
1.20 [.047]
MAX
2.20 [.086]
3.20 [.125]
MAX
1.20 [.047]
MXX.XXX
SYYWWL
XXXXX
3
2.50 [.098]
MAX
2
4
1.00 [.039]
1
1.20 [.047]
1.40 [.055]
SUGGESTED
LAND PATTERN
1.70 [.066]
PIN CONNECTIONS
PIN 1 VOLTAGE CONTROL
PIN 2
CASE GROUND
PIN 3
OUTPUT
PIN 4 SUPPLY VOLTAGE
0.65 [.025]
DIMENSIONS IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR IS RECOMMENDED
0.90 [.035]
Tape & Reel Dimensions
PITCH
Tape Width
REEL DIA
Q1 Q2
Q3 Q4
Q1 Q2
Q3 Q4
PITCH
TAPE WIDTH
REEL DIA
QTY PER REEL
PIN 1 ORIENT.
4.00 [.157]
12.00 [.471]
180 [7.0]
500
Q1
NOTES: UNLE SS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Toleran ces
EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm
Punched Carrier Taping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimeters [inch].
3. Tolerances are ±0.1 [.004] mm unless otherwise specified.
4. Do not scale drawing.
DIRECTION OF FEED
MMD Monitor/Quartztek
30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536,
www.mmdcomp.com
Sales@mmdcomp.com
Revision:
Revisions only with customer approval
03/25/11 B
Pg 2 of 2
MMD [ MMD COMPONENTS ]
