PASSIVE SIGNAL AMPLIFIER
Iin & Iout
T1100L
DESCRIPTION
T1100 series, a standard analog amplifier,
with anterior circuit 4-20mA current signal input
and posterior 4-20mA current signal output ,is a
passive signal isolation module .the series
adopt magneto design and high efficiency loop
electric-larceny technology ,efficiently reducing
the reliance of current signal isolation on the
power ,realize 4-20mA standard signal isolation
with high accuracy and line regulation. Besides,
the modules have extremely low temperature
drift (no more than 35ppm/℃ under -25°C to
+71
°C)
.The isolation voltage between the input
and output can up to 3KVDC.
PRODUCT PROGRAM
Part
Number
T1100L
Power
Supply
None
Input
4-20mA
Output
4-20mA
Isolation
Channels
Power Output
None
1
Package
DIP12
ELECTRICAL CHARACTERISTICS
Power Supply
Power Supply Data
Power Dissipation
Power Protection
Input Signal
None
None
None
4 -20mA
Voltage Drop≤250mV(At input signal=20mA)
≤300mA
<3V(20mA)
4 -20mA
≤300Ω（At
output Signal=20mA）
＜0.05%
meas.val./100Ω
FEATURES
●
Two-port isolation（Between input and output）
●
High accuracy (0.1% F.S.)
●
High linearity (0.1% F.S.)
●
Isolation voltage(3000VDC/60S)
●
Low voltage-drop(At 20mA<3V)
●
Extremely low temperature(35PPM/°C)
●
Industry standard(Operating Temperature
Range:-25°C to 71°C)
●
High reliability(MTBF＞500,000 hours)
Input Data
Input Impedance
Overload
Voltage Drop
Output Signal
Output Data
Load
Load Regulation
TRANSMISSION CHARACTERISTICS
Offset
Gain Error
Temperature Drift
0.1%F.S.
0.1%F.S.
0.0035%F.S./°C(-25°C to +71
°C)
ISOLATION CHARACTERISTICS
MODEL SELECTION
TXXXXL
Package style
Isolation power output
Power supply
Output
Input
Isolation Am plifier
Galvanic Isolation
Isolation Voltage
Insulation Resistance
Two-port isolation（Between input and output）
3KVDC (Tested for 1minute and 1mA max, humidity < 70%)
100MΩ,500VDC（Between input and output）
OTHER CHARACTERISTICS
Ambient
temperature
Package
Weight
Operation temperature:-25°C to +71°C
Transport and Storage temperature:-50°C to +105°C
SIP12
About 8g
No dusts, gases of fiercely vibration, impulsion or gases that may
erode to the components surrounded
MORNSUN Science & Technology co.,Ltd.
Address: 2th floor 6th building, Huangzhou Industrial
District, Guangzhou, China
Tel: 86-20-38601850
Fax:86-20-38601272
Application
Environment
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load
unless otherwise specified.
2. Only typical models listed, specifications of custom product may be different. Please contact our
service people directly for certain conditions.
The copyright and authority for the interpretation of the products are reserved by Mornsun
Specifications subject to change without notice.
T1100L
A/1-2008
Page 1 of 2
MORNSUN [ MORNSUN SCIENCE& TECHNOLOGY LTD. ]
