MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MOC3041/D
GlobalOptoisolator™
6-Pin DIP Zero-Cross
Optoisolators Triac Driver Output
(400 Volts Peak)
The MOC3041, MOC3042 and MOC3043 devices consist of gallium arsenide
infrared emitting diodes optically coupled to a monolithic silicon detector
performing the function of a Zero Voltage Crossing bilateral triac driver.
They are designed for use with a triac in the interface of logic systems to
equipment powered from 115 Vac lines, such as solid–state relays, industrial
controls, motors, solenoids and consumer appliances, etc.
•
•
•
•
Simplifies Logic Control of 115 Vac Power
Zero Voltage Crossing
dv/dt of 2000 V/µs Typical, 1000 V/µs Guaranteed
To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Recommended for 115/240 Vac(rms) Applications:
•
Solenoid/Valve Controls
•
Lighting Controls
•
Static Power Switches
•
AC Motor Drives
MAXIMUM RATINGS
(TA = 25°C unless otherwise noted)
Rating
INFRARED EMITTING DIODE
Reverse Voltage
Forward Current — Continuous
Total Power Dissipation @ TA = 25°C
Negligible Power in Output Driver
Derate above 25°C
OUTPUT DRIVER
Off–State Output Terminal Voltage
Peak Repetitive Surge Current
(PW = 100
µs,
120 pps)
Total Power Dissipation @ TA = 25°C
Derate above 25°C
TOTAL DEVICE
Isolation Surge Voltage(1)
(Peak ac Voltage, 60 Hz, 1 Second Duration)
Total Power Dissipation @ TA = 25°C
Derate above 25°C
Junction Temperature Range
Ambient Operating Temperature Range(2)
Storage Temperature Range(2)
VISO
PD
TJ
TA
Tstg
7500
250
2.94
– 40 to +100
– 40 to +85
– 40 to +150
Vac(pk)
mW
mW/°C
°C
°C
°C
VDRM
ITSM
PD
400
1
150
1.76
Volts
A
mW
mW/°C
VR
IF
PD
6
60
120
1.41
Volts
mA
mW
mW/°C
Symbol
Value
Unit
MOC3041
MOC3042
MOC3043 *
[IFT = 15 mA Max]
[IFT = 10 mA Max]
[IFT = 5 mA Max]
*Motorola Preferred Device
STYLE 6 PLASTIC
6
1
STANDARD THRU HOLE
CASE 730A–04
•
•
•
•
Temperature Controls
E.M. Contactors
AC Motor Starters
Solid State Relays
2
3
ZERO
CROSSING
CIRCUIT
COUPLER SCHEMATIC
1
6
5
4
1.
2.
3.
4.
5.
5.
6.
ANODE
CATHODE
NC
MAIN TERMINAL
SUBSTRATE
DO NOT CONNECT
MAIN TERMINAL
Soldering Temperature (10 s)
TL
260
°C
1. Isolation surge voltage, VISO, is an internal device dielectric breakdown rating.
1.
For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred
devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
(Replaces MOC3040/D)
©
Motorola
Inc. 1995
Motorola,
Optoelectronics Device Data
1