MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MOC8106/D
MOC8106
[CTR = 50–150%]
GlobalOptoisolator™
6-Pin DIP Optoisolators
for Power Supply Applications
(No Base Connection)
The MOC8106, MOC8107 and MOC8108 devices consist of a gallium
arsenide LED optically coupled to a silicon phototransistor in a dual–in–line
package.
•
Closely Matched Current Transfer Ratio (CTR) Minimizes Unit–to–Unit Variation
•
Narrow (CTR) Windows that translate to a Narrow and Predictable Open Loop Gain
Window
•
Very Low Coupled Capacitance along with No Chip to Pin 6 Base Connection for
Minimum Noise Susceptibility
•
To order devices that are tested and marked per VDE 0884 requirements, the
suffix “V” must be included at end of part number. VDE 0884 is a test option.
Applications
•
Switchmode Power Supplies (Feedback Control)
•
AC Line/Digital Logic Isolation
•
Interfacing and coupling systems of different potentials and impedances
MAXIMUM RATINGS
(TA = 25°C unless otherwise noted)
Rating
INPUT LED
Forward Current — Continuous
Forward Current — Peak (PW = 100
µs,
120 pps)
Reverse Voltage
LED Power Dissipation @ TA = 25°C
Derate above 25°C
OUTPUT TRANSISTOR
Collector–Emitter Voltage
Emitter–Collector Voltage
Collector Current — Continuous
Detector Power Dissipation @ TA = 25°C
Derate above 25°C
TOTAL DEVICE
Input–Output Isolation Voltage(1)
(f = 60 Hz, t = 1 sec.)
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
Ambient Operating Temperature Range(2)
Storage Temperature Range(2)
Lead Soldering Temperature
(1/16″ from case, 10 sec. duration)
VISO
PD
TA
Tstg
TL
7500
250
2.94
– 55 to +100
– 55 to +150
260
Vac(pk)
mW
mW/°C
°C
°C
°C
VCEO
VECO
IC
PD
70
7
150
150
1.76
Volts
Volts
mA
mW
mW/°C
IF
IF(pk)
VR
PD
60
1
6
120
1.41
mA
A
Volts
mW
mW/°C
Symbol
Value
Unit
MOC8107
[CTR = 100–300%]
MOC8108
[CTR = 250–600%]
STYLE 3 PLASTIC
6
1
STANDARD THRU HOLE
CASE 730A–04
SCHEMATIC
1
2
3
PIN 1.
2.
3.
4.
5.
6.
NC
NC
6
5
4
ANODE
CATHODE
NO CONNECTION
EMITTER
COLLECTOR
NO CONNECTION
1. Input–Output Isolation Voltage, VISO, is an internal device dielectric breakdown rating.
1.
For this test, Pins 1 and 2 are common, and Pins 4 and 5 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 3
©
Motorola
Inc. 1997
Motorola,
Optoelectronics Device Data
1