MP5010 – PROGRAMMABLE CURRENT 12V/5A ELECTRONIC FUSE
PIN FUNCTIONS
Pin #
1-5
6
7
Description
Source. Internal power FET source. IC output.
DO NOT CONNECT—leave floating.
Current Limit. Using a resistor between this pin and Source to set the overload
I-Limit
and short-circuit current-limit levels.
Enable/Fault. A tri-state, bi-directional interface. Leave floating to enable the
output. Pull to ground (using an open drain or open collector device) to disable
Enable/Fault
the output. If a thermal fault occurs, this voltage enters an intermediate state to
signal that the device is in thermal shutdown.
Slew Rate. The internal dv/dt circuit controls the slew rate of the output voltage
dv/dt
at turn-on.
GND
Ground. Internal IC reference.
V
CC
Input. Positive input voltage.
Name
SOURCE
N/C
8
9
10
11
Exposed Pad
MP5010B Rev. 1.0
www.MonolithicPower.com
4/3/2013
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.
8