MP6215 –CURRENT-LIMITED POWER DISTRIBUTION SWITCH
APPLICATION INFORMATION
Power-Supply Considerations
A ceramic bypass capacitor between IN and
GND, close to the device, is recommended.
Placing a high-value electrolytic capacitor on the
output pin(s) is recommended when the output
load is heavy. This precaution reduces power-
supply transients that may cause ringing on the
input. Optionally, bypassing the output with a
ceramic capacitor improves the immunity of the
device to short-circuit transients.
MP6215 Rev. 0.9
3/23/2010
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2010 MPS. All Rights Reserved.
9