Media Converters
Repeaters and Optimizers
Other significant module features include Link Integrity
Notification (LIN), remote loopback, and Last Gasp alerts.
LIN causes loss of link at any port of one module to disable
the other ports of the modules at each end of the affected
OE link to correctly propagate link status to dependent
network devices even at the functional end of a failed link.
Remote loopback adds to local loopback by verifying the
integrity of the entire link. Last Gasp notification sends a
management alert before the module shuts down in the
event of power loss.
and equipment. Fiber Driver IP-Less™ media converters
are a simpler, cost-effective, and powerful alternative to
traditional IP/SNMP solutions for remote optical Ethernet
link management.
Fiber Driver media converters with remote management
are available for multi-mode as well as single-mode fiber
configurations. Multi-mode modules can span links up to
2 kilometers and single-mode modules can extend beyond
100 kilometers. Single fiber models combine transmit and
receive signals onto the same fiber to reduce the cost even
further for links up to 100 kilometers.
WithoutinnovativeMRVtechnology,thesemodulefeatures
would involve expensive network devices and techniques
including management hardware supporting IP/SNMP at
each end of the link and inconvenient multiple IP address
assignments. To deal with compromised data channel
bandwidth and management security, other options
might include a VLAN or installation of duplicate fibers
Contact
a nearby authorized MRV Communications
representative or visit the MRV website at http://www.
mrv.com for additional information including prices and
availability.
%THERNET $EVICES
-ANAGEMENT
3TATION
#/
&UIFSOFU
&IBER $RIVER -ANAGEMENT -ODULE
%-ꢀꢁꢂ%&2- IN A ꢁꢃ3LOT #HASSIS
&IBER TO THE 8
5SER $ATA
-ANAGEMENT
$ATA
%-ꢀꢁꢂ%2- IN A ꢁꢃ3LOT #HASSIS
%-ꢀꢁꢂ&2- IN A ꢁꢃ3LOT #HASSIS
%-ꢀꢁꢂ%&2- IN A ꢁꢃ3LOT #HASSIS
&IBER TO THE (OME
Physical Specifications
Operating Temperature Range
Storage Temperature
Relative Humidity
00C to 500C (320F to 1220F)
-400C to 700C (-400F to 1580F)
85% maximum, non-condensing
Physical Dimensions
Weight
25 mm x 75 mm x 175 mm deep (1”x 3”x 7”deep)
120-240 g (4.2 - 8.5 oz) depending on configuration
FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity;
RoHS Directive; China RoHS;WEEE Directive
Regulatory Compliance
sales@mrv.com