MECHANICAL SPECIFICATIONS
WEIGHT=7.7 GRAMS TYPICAL
ALL DIMENSIONS ARE ± ±0±ꢀ± INꢁCES ꢂNLESS OꢃCERꢄISE LAꢅELED0
ESD ꢃriangle indicates pin ꢀ0
ORDERING INFORMATION
MSK5920-3.3 K RH U
LEAD CONFIGURATIONS
S= STRAIGHT; U= BENT UP; D= BENT DOWN
RADIATION HARDENED
SCREENING
BLANK= INDUSTRIAL; E=EXTENDED RELIABILITY
H=MIL-PRF-38534 CLASS H; K=MIL-PRF-38534 CLASS K
OUTPUT VOLTAGE
1.5=+1.5V; 1.9=+1.9V; 2.5=+2.5V; 2.8=+2.8V;
3.3=+3.3V; 5.0=+5.0V
GENERAL PART NUMBER
The above example is a +3.3V, Class K regulator with leads bent up.
NOTE: See DSCC SMD 5962-05220 for DSCC part number options.
M.S. Kennedy Corp.
4707 Dey Road, Liverpool, New York 13088
Phone (315) 701-6751
FAX (315) 701-6752
www.mskennedy.com
The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make
changes to its products or specifications without notice, however, and assumes no liability for the use of its products.
Please visit our website for the most recent revision of this datasheet.
Contact MSK for MIL-PRF-3ꢀ534 Class H, Class K and Appendix G (radiation) status.
Rev. G 1/06
7